768191
7
Zoom out
Zoom in
Previous page
1/48
Next page
INSTALLATION GUIDELINES
R699900 - Eos Series User Manual 7
Do not look into the inside of this unit through vents (ventilation holes). Do not stare into the beam. The
light is so powerful that your eyesight can be impaired. RG2 from the IEC 62471-5:2015 classication.
Do not drop, hit or damage the light-source lamp (lamp unit) in any way. It may cause the light source lamp
to break and lead to injuries. Do not use a damaged light source lamp. If the light source lamp is broken, ask
your dealer to repair it. Fragments from a broken light-source lamp may cause injuries.
The light-source lamp used in this projector is a high pressure mercury lamp. Be careful when disposing of the
light source lamp. If anything is unclear, please consult your dealer.
Do not ceiling-mount the projector to a place which tends to vibrate; otherwise, the attaching xture of the
projector could be broken by the vibration, possibly causing it to fall or overturn, which could lead to personal
injury.
The power supply rating of this product is AC100V AC240V, the power cord attached conforms to the
following power supply voltage. Use only the power cord designated by our dealer to ensure Safety and EMC.
When it is used by other power supply voltage, power cable must be changed. Ensure that the power cable
used for the projector is the correct type for the AC outlet in your country. Consult your product dealer.
Caution: Do not allow any unqualied person to install the unit. Be sure to ask your dealer to install the unit
(e.g. attaching it to the ceiling) since special technical knowledge and skills are required for installation. If
installation is performed by an unqualied person, it may cause personal injury or electrical shock.
1.4  Imageprojectorclassication
IEC62471-5 labels located at the top front of this unit.
As with any bright light source, do not stare into the beam when this unit is operating. This unit is rated
RG2 from the IEC 62471-5 classication.
2.0  INSTALLATION GUIDELINES
2.1  Introduction
The Eos Series projectors are equipped with a three-chip LCoS light engine capable of projecting a picture
resolution of 4096 x 2160 pixels (true 4K). The highest model of the Eos Series is the Eos Signature that can
display pictures up to 8192 x 4320 pixels resolution thanks to the new 8K Interpolation engine. 8K resolution is
more than 17 times Full-HD resolution.
Supported 2D signals and pixel depth
480p, 576p, 720p@50/60Hz, 1080i@50/60Hz, 1080p@24/50/60Hz
4Kp@24/25/30Hz and UHD: 3840×2160@24/25/30Hz (up to RGB and YCbCr 4:4:4 12 bits pixel depth)
4Kp@50/60Hz and UHD: 3840×2160@50/60Hz (YCbCr 4:2:2 up to 12 bits pixel depth or up to 8 bits for RGB and
YCbCr 4:4:4). Note that the native resolution of this projector is 17:9 ratio, 4096x2160 pixels, 16:9 signals such
as 3840x2160@24/25/50/60Hz or Full-HD are supported and will need to be masked on left and right to eliminate
light leaking on the sides of the screen.
Supported 3D signals
This unit is compatible with 3D playback. The source can be connected using one of the two available HDMI
inputs and will be up-scaled to 4K resolution. The inputs are compatible with the following 3D formats:
1080p @ 23.98/24 Hz - Frame Packing, Top & Bottom and Side-by-Side
720p @ 50 or 59.94/60 Hz - Frame Packing, Top & Bottom and Side-by-Side
1080i/p @ 50/60 Hz - Side-by-Side
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DreamVision Eos at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DreamVision Eos in the language / languages: English as an attachment in your email.

The manual is 13,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info