Manual Drayton Digistat RF3 (page 2 of 4) (English)

46370

2

Zoom out

Zoom in

Previous page

1/4

Next page

DIGISTAT RF3

Once the ‘wireless system’ has been commissioned, the unit will

display the actual room temperature and the time at somewhere

after 12.00 midnight (Diagram A).

Note: If this unit has replaced a standard room thermo-stat

and/or a programmer is incorporated in the control system, it is

suggested that the central heating (CH) channel is switched to

On/Cont/24hrs. Operation of the heating times and tempera-

tures will be controlled by this unit.

Diagram A Diagram B

Digistat RF3 has an indicator to show when the heating system is ON or OFF, e.g. if the SET

temperature is 20°C and the actual room temperature is below 20°C a flame symbol will appear on

the display (Diagram B). This indicates a demand for heat (system will switch ON).

During normal operation, the Digistat RF3 will display actual room temperature continuously.

SETTING THE TIME OF DAY (steps 1-5)

The diagram next to each step description shows resulting display.

1. Press “SET?” button

2. Press “Yes” (–) button.The hours will flash

as Fig. 2. Use the + and – buttons to set

correct hour.

3. Press “SET?” button again and the minutes will flash, use + and –

buttons to set correct minute time.

4. Press “SET?” button, day of the week will flash, 1 = Monday,

7 = Sunday, use + and – buttons to set correct day.

5. Press “SET?” button twice to return to normal operating mode.

PRE-PROGRAMMED TIMES AND TEMPERATURES

The Digistat RF3 comes with the following preset programme.

Symbol Mon-Fri Sat-Sun Temperature

Time Time

6.30 am 7.00 am 20°C

8.30 am 9.00 am 16°C

4.30 pm 4.00 pm 21°C

10.30 pm 11.00 pm 7°C*

* 16°C if selector pin removed, see installation instructions.

+

+

+

+

SYSTEM OFF SYSTEM ON

1

I have a Drayton Digistat+3rf. When programming the daily temperatures there are 6 different time periods each day. As I am at home all day I keep the same temperature throughout the 6 periods, only dropping to a lower frost setting overnight. The only way I know to change these settings is to laboriously work through each period one after the other, for each day of the week - 42 consecutive changes! Is there a simpler way of setting the same temperature across all 6 daily time periods? I know you can manually override the existing setting by increasing the temperature using the “ + “ button, but this only lasts until the next time period kicks in when it reverts to the normal programmed setting. Submitted on 28-11-2021 at 18:45
Reply Report abuse
I have a Drayton digistat +3rf the screen is showing E7 does anyone know what it means
Submitted on 11-6-2020 at 10:51
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for Drayton Digistat RF3 at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Drayton Digistat RF3 in the language / languages: English as an attachment in your email.

The manual is 0,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Drayton Digistat RF3

Drayton Digistat RF3 Manual - Dutch - 2 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info