499410
52
Zoom out
Zoom in
Previous page
1/56
Next page
Replacement of UV-lamps and starters
in the radiation segments
Lamp
sockets
UV-low pressure
lamp
(120 W/180 W)
Acrylic disk
frame
Low pressure
lamp segments
Starter
Lamp-/ starter
socket
Open the acrylic disk frame, which is held with
magnetic locks on the left inside, by pivoting the frame
to the right side.
The UV low pressure lamps are turned 90° at the head
and foot end and are removed towards the front.
Notice when installing the new lamps that the contact
pins at the lamp ends are correctly located in the so-
cket.
The starters are located in the lower area of the
respective lamps and are removed and newly installed
by 90° turns in their sockets.
Exchange of the metal halogen lamps in
the intensive tanner segments
Here the acrylic disk frame must be pivoted out
as already described.
Fold out the door unit with the filter disk.
Open the bolt lock on the left side with the enclosed
key.
You now have direct access to the metal halogen lamps
(400 W) in the center of the reflectors.
Please observe:
When installing and removing the metal halogen
lamps the glass bulb may not be touched. Use gloves,
cloth or similar.
If the glass bulb is accidentally touched, it must be
cleaned with pure or ethyl alcohol.
For changing touch the bulb at the outside flat end and
pull out of the socket (Fig 67).
Always let the lamp cool down first!
Danger of burns!
When inserting the new bulbs, please note that the
contact pins have to be in the right position before the
bulb is pressed into the socket.
Fig. 66
Fig. 67
52 english
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dr. Kern Twister at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dr. Kern Twister in the language / languages: English, German as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info