499406

Dr. Kern Prestige Manual

36
Zoom out
Zoom in
Previous page
1/40
Next page
To remove the lamp, grasp an outer, flattened end, push
it in the direction of the lamp end (longitudinally) and
pull it from the socket. Inserting the new lamp is
performed in the same manner.
Please note:
Do not touch the glass cylinder when removing or
inserting metal halogen lamps. Should this happen,
the lamp must be cleaned with pure alcohol or spirit.
Cleaning and replacement of the filter
plates in the high-intensity facial tanners
IIf it is necessary to clean the filter plates or replace
them due to damage, you must first fold down the acrylic
plate of the canopy and remove the face panel, as
previously described.
After you have removed the face panel, unscrew the
angle brackets on the outside. Now the filter plates can
be pushed out through the grooves on either side of the
face panel.
Please note:
The use of defective filter plates or plates not designed
for the specified system can result in burns to the skin
and is therefore to be avoided under any circum-
stances.
Use only original replacement parts (see equipment
model number on the identification plate).
The replacement of cleaned or new filter plates is
performed using the same procedure in reverse
sequence.
Adjustment of the tension spring system
The easy, low-friction swinging movement of the
canopy is ensured by the spring system integrated in
the foot-end sections on the right and left hand side.
The spring system is factory-adjusted to the
corresponding system model so that the canopy will
always remain in the open as well as in the closed
position as desired.
Should it be necessary, you may tighten or loosen the
springs using the threaded fastener for adjustment.
To this end you must first remove the base panel, as
described in the section on disassembly and
reassembly of the system.
angle bracket for
filter plates
face panel with
filter plate
36 english
… 36 …


Need help? Post your question in this forum.

Forumrules
1

Forum

dr.-kern-prestige

Reset search

  • I have a 2005 dr kern prestige tan bed, looking for used facial glass & u.v. Filters & possibly complete asm including retaining brackets Submitted on 9-12-2021 at 05:33

    Reply Report abuse

  • I have a 2005 dr kern prestige tan bed , looking for facial glass or complete u.v. Glass & retainer Submitted on 9-12-2021 at 05:18

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dr. Kern Prestige at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dr. Kern Prestige in the language / languages: English, German as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info