Manual Doro Primo 401 (page 1 of 2) (English)

589633

1

Zoom out

Zoom in

Previous page

1/2

Next page

Power on the phone

Press and hold the red button on the

phone to turn it on and off.

If the SIM card is valid but protected with a

PIN code (Personal Identication Number),

Enter PIN

is displayed.

Enter the SIM PIN code and press

OK

( upper left corner of keypad). Delete with

Delete

( upper right corner of keypad).

Setting the language

The default language of the phone menu,

messages and so on is determined by the SIM

card used (Automatic). You can always switch

between the languages supported by the phone.

1. Press

Menu

â

Settings

â

OK

.

2. Select

Phone settings

â

OK

.

3. Select

Language

â

OK

.

4. Select language â

OK

.

Setting time and date

1. Press

Menu

â

Settings

â

OK

.

2. Select

Phone settings

â

OK

.

3. Select

Time and date

â

OK

.

4. Select

Set time/date

â

OK

.

5. Enter the time (HH:MM) â .

6. Enter the date (DD/MM/YYYY) â

OK

.

1. Receiver/

loudspeaker

Make phone calls holding

the cell phone to the ear

2. Display

3. Left soft key

Right soft key

Selection of the main menu

Open the phone directory

4. Call button Dial and answer calls;

open the call log

5. Arrow keys In idle state to open the

quick access list

to open messages.

Scroll up and down in

menus and lists

6. Speed dial Speed dial the numbers

saved under M1, M2 and

M3 with one keystroke

7.

*

key In idle state: to enter: “*”/ “+”

/ “P”/“W“;

Input: special characters

8.

#

key In idle state: long keystroke

to toggle between ring tone

on/off;

Input: toggle input modes

9. Microphone

10. Numerical

keys

In idle state: input of phone

number;

long keystroke on 1: calling

the voice mail box (the

phone number must be

stored)

11. Exit key Exiting a call, returning to

idle state; switching the

phone on/off

12. LEDs

Notication of missed

calls and received text mes-

sages,

Battery charging

13. Micro USB

port

For battery charger

14. Headset

connector

For standard headset with

3.5 mm

phone jack

Installing the SIM card and the battery

The SIM card holder is located inside the battery

compartment.

CAUTION

Only use batteries, charger and accessories

that have been approved for use with this

particular model. Connecting other accessories

may be dangerous and may invalidate the

phone’s type approval and guarantee.

1. Remove the cover

of the battery

compartment by

placing a thumb on

the cover’s rife on

the rear of the phone

casing and pushing

the cover downwards.

If the rechargeable

battery is inserted,

remove it by lifting it

on the notch at the top

using a nger nail.

2. Insert the SIM card

by carefully pushing

it under the metal

bracket on the lower

side. Make sure the

contacts of the SIM

card point downwards

and the cut-off corner

ts exactly in the

recessed shaping

of the holder. The

contacts of the SIM

card must not be

scratched or bent.

Try not to touch the

contacts with your

ngers.

3. Insert the rechargea-

ble battery by pushing

it into the battery

compartment ensuring

that the three contacts

on the front touch the

three spring contacts

on the bottom in the

battery compartment.

4. Replace the cover

and push it upward

using gentle pressure

with the thumb until

it snaps securely into

place again.

When the battery performance is low, the

empty battery symbol ashes to indicate the

battery state and an alarm signal will sound. To

recharge the battery, connect the mains adapter

to the micro USB connector on the bottom side

of the phone.

When the battery charger is connected to the

phone, the red charging LED is on. The battery

charge status moves when the battery is

charging (visible in the upper right corner of the

display).

A complete charging process of the recharge-

able battery takes approximately 3 hours. When

the battery is fully charged the animation of the

battery charging status stops.

1

2

3

4

5

6

7

8

9

10

11

14

12

13

Primo

™

401

Quick Start Guide

English

© IVS GmbH 2015 • All rights reserved

QSG_Primo_401_en_A4(A7)_v1.1

English

Version 1.1

0197

Specications

Network:

GSM 900/1800 MHz

Dimensions:

91 mm x 46 mm x 19 mm

Weight:

74 g

Battery:

3.7V/800 mAh Li-ion battery

Operating ambient temperature:

Min: 0°C (32°F) Max: 40°C (104°F)

Charging ambient temperature:

Min: 0°C (32°F) Max: 40°C (104°F)

Storage temperature:

Min: -20°C (-4°F) Max: 60°C (140°F)

Changes and errors excepted.

EN

1

There's a lot the quick start guide doesn't say so how do I download a more detailed guide for the Doro Primo 401? I can only find the quick start guide. Submitted on 5-6-2018 at 18:54
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for Doro Primo 401 at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Doro Primo 401 in the language / languages: English as an attachment in your email.

The manual is 3,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Doro Primo 401

Doro Primo 401 User Manual - German - 2 pages

Doro Primo 401 Quick start guide - Dutch - 2 pages

Doro Primo 401 Quick start guide - French - 2 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info