478456

Domo DO 7074 S Manual

32
Zoom out
Zoom in
Previous page
1/38
Next page
DO7074S
Note:When changing your temperature control dial setting from high setting to lower,
it is proposed that not to start ironing immediately since there may be any burns
caused on your fabrics by high temperature. Please wait for temperature indicator light
(in iron unit) stop blinking, and then start ironing.
Otherwise burns will be caused to your fabrics.
VERTICAL STEAM IRONING
Follow the steam ironing process, and then hold the iron in vertical position between
5cm and 15cm away from the hanged fabrics. Press down steam switch, this will cre-
ate vertical steam. This feature is especially used for removing creases from hanging
clothes and curtains. Never directly perform steam ironing on people.
NOTE:
a. During the steam process, the surface temperature of the supply hose would be quite
hot. It is normal since there has steam passing through the steam transportation pipe
inside from the base to iron. Do not touch by hand!
b. Please keep the supply-hose unblocked and untwisted.
REPLACEMENT OF FILTER
How often the lter needs to be replaced depends on the water hardness. We recom-
mend to change the lter every 4 – 6 months.
Follow below procedure to replace the lter:
I. Slide out the water tank from the base, and then take out the lter from the water
tank.
II. Replace it with a new one.
III. Re-install it into the water tank.
IV. Fill water into water tank up to MAX ll level, and slide water tank into the power
base again.
Note: For every rst use of the lter, please put the lter for 10 min. it in water for bet-
ter performance.
SAFETY PROTECTION DEVICE
This appliance has a safety valve protection device on the base unit. If the supply hose
is blocked accidentally, the safety valve will be opened to release the steam under the
base unit. This is normal that it may produce a high pitch sound. Once this abnormal
condition happened, unplug the appliance
immediately. To check whether any damage is found in the supply hose.
ANTI-SCALE SYSTEM
1. Filter is designed to reduce the build-up of limescale which occurs during steam
ironing, this will prolong the working life of your iron. However, please note that the
lter will not completely stop the natural process of limescale build-up.
2. Filter should be replaced with a new one after about 4-6months use. Working life of
32
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Domo DO 7074 S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Domo DO 7074 S in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info