719318

Domo B3963 Manual

50
Zoom out
Zoom in
Previous page
1/100
Next page
50
B3963
EN
The inside of the loaf is
not ready.
If the bread is too soft in the middle, this may be due to the type of our
used. This is usually the result of using heavier ours, such as rye our or
wholemeal our. Try using one more kneading process when using these
types of ours. When the bread maker has nished the rst kneading
process, stop the machine. Then reset the unit and press Start. The
machine will start kneading again; there will now be a larger amount of air
in the dough.
The bottom of the bread
is too thick.
You left the bread in the appliance a bit longer with the warming function
on. The water will evaporate, giving you a thicker bottom. Remove the
bread from the appliance immediately after the program.
The bread has
overowed.
· You used too much yeast.
· The yeast has been too strongly activated, e.g. by too much sugar or
too high a temperature.
H:HH appears on the
display.
The unit is still too hot. Allow the appliance to cool rst.
E:RR appears on the
display.
There is a problem with the temperature sensor. Send the device to our
after-sales service.
L:LL appears on the
display.
The unit is too cold. This could happen if you always store the device in a
cold place (e.g. In the cellar). Let the unit warm up for a moment.
Why can’t I add extra
ingredients at the start of
the program?
The extra ingredients (such as currants or nuts), will be kneaded to pieces
and the bread will not be kneaded properly. It will also aect the rising.
Only add the extra ingredients once the appliance beeps, after kneading/
rising.
Can I use milk instead of
water?
Yes! Always make sure that the complete volume of moisture is correct.
The ratio of milk and water makes no dierence.
The crust is sometimes
lighter and sometimes
darker.
These can be selected with the ‘Colour’ button. Preparations with more
sugar will also make the crust darker.
The bread machine is
kneading slower than
normal.
This can happen with heavy ours, causing the engine to work harder.
However, this is not a problem for the machine. Add a tablespoon of liquid.
The kneading paddle
is stuck in the baking
mould.
Remove the bread from the mould. Fill the mould with warm water and
leave to soak for 15 minutes. The stuck dough will come loose.
There is condensation
on the inside of the
inspection window.
This is normal. This is due to the heat.
I used a ready-made mix,
but the bread still came
out wrong.
Before sending the device in for repair, we recommend that you try
the basic recipe again. Ready-made mixes can sometimes also contain
ingredients that produce poor results.
… 50 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Domo B3963 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Domo B3963 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info