648548
78
Zoom out
Zoom in
Previous page
1/120
Next page
B3951
78
If a kneading paddle should get stuck in the bread, try and remove it as gently as
you can. If necessary, you can allow the bread to cool down a little more so you
can remove the kneading paddle with your hands afterwards. Beware that you only
touch the kneading paddle with your hands if it has sufciently cooled down. We
recommend that you wait 15 to 20 minutes before cutting the bread.
EXTRA: in case you should not make it home in time, the bread maker will continue
to heat the bread for another 60 minutes. This additional time is not included in the
program time. Press the ‘start/stop’ button for a few seconds, if you want to interrupt
this part of the process. If you leave the bread in the bread maker for more than an
hour, it will become moist.
Rinse the bread pan immediately with warm water, after you’ve taken out the bread, to
make sure the kneading paddles don’t keep stuck to the axle.
Do not activate the bread maker, if the appliance hasn’t cooled down or warmed up
yet.
Removing the kneading paddle before baking
You can remove the kneading paddle, after the dough has been kneaded for the last
time.
1. Shortly press the ‘start/stop’ button to interrupt the baking process or disconnect
the plug from the power socket.
2. Open the lid and take out the bread pan. Take out the dough with oured hands
and remove the kneading paddle.
3. Place the dough back in the bread pan and close the lid.
4. Insert the plug into the power socket and press the ‘start/stop’ button. The
program will be continued.
HOW TO USE THE TIME DELAY FUNCTION
When you want to use the time delay function, you should program it before you press
the ‘start/stop’ button.
Important: never use the time delay function with easily perishable ingredients.
Please carry out the rst 8 steps, as described in the chapter ‘Operating instructions.
Next you press the ‘Time +’ button in order to adjust (increase) the time set on the
display.
Example: the time is 9 am and you want your bread to be ready by 5 pm.
1. Put all ingredients in the bread pan.
2. Place the bread pan in your bread maker.
3. Close the lid and select the program using the MENU button.
4. Press the colour button to select the browning of the crust. Press the loaf size
78


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Domo B3951 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Domo B3951 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info