Manual Domo b 3950 (page 23 of 24) (English, German, Dutch, French)

379945

Zoom out

Zoom in

1/24

B3950

b3950

The centre of the bread is not sufficiently baked

This may be due to the type of flour you used, often too heavy varieties such as rye flour or wholemeal

flour. Try to program an extra kneading process when using these types of flour. As soon as the bread

maker has terminated the first kneading process, you press stop. Next, you reprogram the bread maker

and press start: the appliance will start kneading again, a larger quantity of air has now been absorbed

by the dough. You could also try selecting the dark crust colour, because this slightly increases the

baking temperature.

The bread has risen too much

If your bread rises higher than it ought to, you have used too much yeast. Please check whether you

have used the right quantity and the right type of yeast. Too much sugar can overactivate the yeast.

Try reducing the dose of sugar and do not use too much dried fruits or honey, which equally contain a

lot of sugar. Try using 10 to 20 ml less water. Do bear in mind that a lower degree of humidity could

brake the activity of the yeast. Sometimes over-rising can also be caused by flour that was grinded too

fine. These varieties of flour do not require an equally active yeast as heavier varieties do.

The bread is too dry

Try using less flour or add a tablespoonful of liquid. While your bread maker is kneading fairly heavy

dough or when you have programmed longer kneading times, the appliance may occasionally tremble

a bit. Therefore you must make sure your bread maker is always positioned on a stable surface, not too

near to another object and not too close to the edge of the kitchen sink unit.

The bread is flat

If you are using grinded flour or wholemeal flour, your bread tends to be somewhat flatter. If your

bread does not rise at all, you need to check the yeast. Have you thought of adding the yeast? If the

bread has only risen a little bit, the yeast you used may have been too old. Too hot or too cold water

also brakes the yeast’s activity. Please also verify whether you have not

used too much salt.

Error on the display

If you see the indication “H:HH” appearing on the display after you have pressed the start button, this

means that your bread maker has not sufficiently cooled down yet. It is necessary to allow your appli-

ance to cool down for another 10 to 20 minutes, with its lid open. If the error “E:EE” appears on the

display after you have pressed the start button, your bread maker needs to be serviced by a qualified

technician. Please contact your store.

FREQUENTLY ASKED QUESTIONS

Why is the height of the bread different on every occasion?

The shape and the height of the bread depend on the ambient temperature, the quality and the quan-

tity of the used ingredients.

Why doesn’t the bread rise?

You have forgotten to add the yeast or you have added an insufficient quantity, or the yeast you have

used is too old.

How does the time delay function work?

You must not program this function for a period of time under 3 hours or over 13 hours. The time

delay function requires minimum 58 minutes to deal with all the necessary stages of the process. You

can use the program “fast”, but not with the time delay function. Ingredients may go bad if they are

kept in the bread maker for more than 13 hours without being baked.

Why can’t i add extra ingredients to the basic ingredients?

For the dough or the bread to have the right shape and to rise in the appropriate manner, dried raisins

and similar ingredients need to be added at a later stage. Moreover, such ingredients may be dam-

aged in the kneading process. They could also get sticky or get distributed unevenly throughout the

dough.

You should not add these ingredients until you have heard the first bleep. Do not add any ingredients

when you are using the “fast” or “speed” programs. You can not program the time

delay function when you have selected the “dough” program.

Can i use fresh milk instead of water?

Yes, as long as you do not alter the total quantity of liquid. For example: if the recipe says you need

210 ml of water, you could replace this quantity by 210 ml of milk or, equally, by 105 ml of water and

105 ml of milk. The total quantity of liquid has to be maintained.

GENERAL REMARKS

1. Sometimes the crust has light colour, sometimes it is darker:

You can adjust the crust colour yourself, by using the “color” button. This button allows you to select

a “light”, “medium” or “dark” crust colour.

2. Why has my bread risen as high as the lid of the breadmaker?

You have used either too much sugar or too much yeast or both. This has caused a larger amount of

gas bubbles within the bread.

3. Why doesn’t the program ‘fast’ allow me to bake a bread with fruits?

With this program, the time for fermenting is shorter. When you add more ingredients, this will also

effect the baking time and the result will be disappointing.

4. When making heavier types of bread, the appliance seems to knead slower.

This is perfectly normal and does in no way damage your bread maker. We do however advise you to

add a tablespoonful of liquid, when baking heavier bread.

BEFORE TAKING YOUR APPLIANCE BACK TO THE STORE, YOUR

BREAD KEEPS TURNING OUT BAD

We recommend that you try and bake one bread on the basis of a ready-made bread mix. These types

of mixtures only require that you add some water and butter. If that works and the result is to your

liking, this means there is nothing wrong with your bread maker. Please check the freshness of the

ingredients used.

41 42

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Domo b 3950 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Domo b 3950 Manual

Product: