323536
3
Zoom out
Zoom in
Previous page
1/24
Next page
-3-
Guide de mise en service
1. Déballez votre produit et posez-le
sur un support stable.
2. Sortez le réservoir de son
logement en le tirant vers vous.
3. Retirez la cassette anticalcaire de
son enveloppe.
5. Placez la cassette dans le
logement prévu dans le réservoir.
Elle doit reposer sur le fond du
réservoir.
6. Remplissez le réservoir d’eau au
maximum.
7. Replacez le réservoir en le
poussant bien au fond de son
logement.
8. Réglez le bouton du thermostat du
fer sur la plage vapeur.
9. Branchez l'appareil.
10.Appuyez sur le bouton
Marche/Arrêt pour mettre
l’appareil en Marche.
11.Le voyant de mise sous tension et
le voyant de chauffe du
générateur s’allument.
12.Sélectionnez le grand débit
vapeur.
13.Attendez environ 3 minutes que
l’appareil soit prêt.
14.Appuyez sur la gâchette vapeur
jusqu'à obtention de la vapeur.
L’émission de vapeur s’arrêtera en
relâchant la gâchette. Le bruit de
la pompe est normal.
15. Votre appareil est prêt à repasser.
Quick Start guide
1. Das Gerät auf eine feste
Unterlage stellen.
2. Den Wassertank herausziehen.
3. Nehmen Sie die Kalkfilter-
Kartusche aus ihrer
Feuchtigkeitsschutzhülle.
5. Setzen Sie sie in das vorgesehene
Gehäuse ein. Sie muß auf dem
Boden des Tanks aufliegen.
6. Füllen Sie den Behälter, bis die
Wasserstandsanzeige den maxi-
malen Stand erreicht.
7. Den Wassertank wieder fest in
sein Gehäuse drücken.
8. Den Thermostat-Regler zum
Dampfbügeln zwischen ●● und
●●● stellen.
9. Schließen Sie das Gerät an.
10. Schalten Sie mit dem Knopf
Ein/Aus das Gerät ein.
11. Die Kontrolllampe Unter
Spannung und die Kontrolllampe
Vorheizen des Generators leuch-
ten auf.
12. Wählen Sie die große
Dampfmenge.
13. Warten Sie rund 3 Minuten bis
das Gerät bereit ist.
14.Dampfstoßtaste drücken, bis Sie
Dampf erhalten. Während des
Betriebs ist das Surren der Pumpe
normal.
15. Ihr Gerät ist jetzt betriebsbereit.
Quick Start guide
1. Place the machine on a hard sur-
face
2. Remove the water reservoir from
its housing by pulling it towards
you.
3. Remove the anti-scale cartridge
from the bag.
4. Do not remove the filtering foam.
5. Place it firmly into the water reser-
voir. It must rest on the bottom of
the reservoir.
6. Fill the reservoir to the maximum
level.
7. Replace the reservoir by pushing it
right into its housing.
8. Set the iron thermostat dial bet-
ween the 2 and 3 dot settings.
9. Plug in the appliance.
10.Press the On/Off button to switch
the appliance on.
11.The power on and generator hea-
ting pilot lights.
12.Select the maximum steam output
level.
13.Wait about 3 minutes for the
appliance to be ready.
14.Press the steam trigger until steam
is released. To stop steaming,
release the steam trigger. The
pump can be heard humming
during normal use.
15. Your product is ready for ironing.
500476534_Brochure_Primalis 28/02/08 14:19 Page 3
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Domena primalis 300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Domena primalis 300 in the language / languages: English, German, French as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info