507712
2
Zoom out
Zoom in
Previous page
1/52
Next page
2
Thank you for purchasing a DOLMAR
product!
Congratulations on choosing a DOLMAR Power Cutter! We are
condent that you will be satised with this modern piece of
equipment.
We want you to be satised with your DOLMAR product.
In order to guarantee the optimal function and performance of your
Power Cutter and to ensure your personal safety we would request
you to perform the following:
Read this instruction manual carefully before putting the Power
Cutter into operation for the rst time, and strictly observe the
safety regulations! Failure to observe these precautions can
lead to severe injury or death!
For European countries only
EC Declaration of Conformity
The undersigned, Tamiro Kishima and Rainer Bergfeld, as
authorized by Dolmar GmbH, declare that the DOLMAR
machine(s):
Designation of Machine: Power Cutter
Model No./ Type: PC-7612V, PC-7614V
Specications: see “Technical data” table.
are of series production and
Conforms to the following European Directives:
2000/14/EC, 2006/42/EC
And are manufactured in accordance with the following standards or
standardised documents:
EN ISO 19432
The technical documentation is on le at:
Dolmar GmbH,
Jenfelder Straße 38, Abteilung FZ,
D-22045 Hamburg
The conformity assessment procedure required by Directive
2000/14/EC was in Accordance with annex VIII.
Notied Body:
TÜV Rheinland LGA Products GmbH
Tillystraße 2
D-90431 Nürnberg
Identication number 0197
Measured Sound Power Level: 113 dB (A)
Guaranteed Sound Power Level: 114 dB (A)
14. 1. 2011
Tamiro Kishima
Managing Director
Rainer Bergfeld
Managing Director
English
(Original instructions)
Table of Contents Page
Packing ............................................................................................2
Delivery inventory ..........................................................................3
Symbols...........................................................................................3
SAFETY PRECAUTIONS ................................................................4
General precautions ...................................................................4
Protective equipment .................................................................4
Fuels / Refuelling .......................................................................5
Putting into operation .................................................................5
Cutoff discs ................................................................................6
Kickback and lock-in ..................................................................7
Working behavior / Method of working .......................................7
Cutting metals ............................................................................8
Cutting masonry and concrete ...................................................8
Transport and storage ................................................................9
Maintenance .............................................................................10
First aid ....................................................................................10
Technical data ............................................................................... 11
Denomination of components .....................................................12
PUTTING INTO OPERATION ........................................................13
Mounting the cutting disc .........................................................13
Tightening the V-belt / Checking V-belt tension .......................14
Before operating .......................................................................14
Operating .......................................................................................16
Starting .....................................................................................16
Adjusting the carburetor ..............................................................17
MAINTENANCE .............................................................................17
V-belt .......................................................................................18
Cleaning the protection hood ...................................................18
Cleaning/changing the air lter .................................................19
Spark plug maintenance ..........................................................20
Replacing the suction head ......................................................20
Cleaning the starter ..................................................................21
Changing the cutting attachment position (central/side) ..........22
SPECIAL ACCESSORIES .............................................................23
Diamond cutting discs ..............................................................23
Guide trolley .............................................................................23
Water tank (the component of trolley) ......................................23
Mains/pressure water system ..................................................23
Maintenance chart ........................................................................24
Fault location ................................................................................24
Troubleshooting ...........................................................................25
Storage ..........................................................................................26
Packing
Your DOLMAR Power Cutter is packed in a cardboard box to
prevent shipping damage.
Cardboard is a basic raw material and is consequently reuseable or
suitable for recycling (waste paper recycling).
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dolmar PC-7614V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dolmar PC-7614V in the language / languages: English, Dutch as an attachment in your email.

The manual is 4,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info