Manual Dolmar CS-246.4C (page 4 of 44) (English, Dutch)

507664

Zoom out

Zoom in

1/44

Start the Multi Function Power Head only in accordance with the instructions.

Do not use any other methods for starting the engine! -

Use the Multi Function Power Head and the tools only for such applications -

as specied.

Only start the Multi Function Power Head engine, after the entire assembly -

is done. Operation of the device is only permitted after all the appropriate

accessories are attached!

Before starting make sure that the attachment has no contact with hard -

objects such as branches, stones etc. as the attachment will revolve when

starting.

The engine is to be switched off immediately in case of any engine problems. -

Should the attachment hit stones or other hard objects, immediately switch off -

the engine and inspect the attachment.

Operate the Multi Function Power Head only with the shoulder strap attached -

which is to be suitably adjusted before putting the Multi Function Power Head

into operation. It is essential to adjust the shoulder strap according to the user

size to prevent fatigue occurring during use. Never hold the cutter with one

hand during use.

During operation always hold the Multi Function Power Head with both hands. -

Always ensure a safe footing.

Operate the Multi Function Power Head in such a manner as to avoid -

inhalation of the exhaust gases. Never run the engine in enclosed rooms (risk

of gas poisoning). Carbon monoxide is an odorless gas.

Switch off the engine when resting and when leaving the Multi Function -

Power Head unattended, and place it in a safe location to prevent danger to

others or damage to the machine.

Never put the hot Multi Function Power Head onto dry grass or onto any -

combustible materials.

All protective installations and guards supplied with the machine must be -

used during operation.

Never operate the engine with faulty exhaust mufer. -

Shut off the engine during transport. -

During transport over long distances the tool protection included with the -

equipment must always be used.

Ensure safe position of the Multi Function Power Head during car -

transportation to avoid fuel leakage.

When transporting the Multi Function Power Head, ensure that the fuel tank -

is completely empty.

When unloading the Mul - ti Function Power Head from the truck, never drop

the engine to the ground or this may severely damage the fuel tank.

Except in case of emergency, never drop or cast the Multi Function Power -

Head to the ground or this may severely damage the Multi Function Power

Head.

Remember to lift the entire equipment from the ground when moving the -

equipment. Dragging the fuel tank is highly dangerous and will cause damage

and leakage of fuel, possibly causing re.

Refuelling

Shut off the engine during refuelling, keep away from open ames and do not -

smoke.

Avoid skin contact with mineral oil products. Do not inhale fuel vapor. Always -

wear protective gloves during refuelling. Change and clean protective clothing

at regular intervals.

Take care not to spill either fuel or oil in order to prevent soil contamination -

(environmental protection). Clean the Multi Function Power Head immediately

after fuel has been spilt.

Avoid any fuel contact with your clothing. Change your clothing instantly if -

fuel has been spilt on it (to prevent clothing catching re).

Inspect the fuel cap at regular intervals making sure that it can be securely -

fastened and does not leak.

Carefully tighten the fuel tank cap. Change location to start the engine (at -

least 3 meters away from the place of refuelling).

Never refuel in closed rooms. Fuel vapors accumulate at ground lever (risk of -

explosions).

Only transport and store fuel in approved containers. Make sure the fuel -

stored is not accessible to children.

• Resting

• Transport

• Refuelling

• Maintenance

• Tool replacement

3 meters

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dolmar CS-246.4C in the language / languages: English, Dutch as an attachment in your email.

The manual is 4,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dolmar CS-246.4C Manual

Product: