163877
2
Zoom out
Zoom in
Previous page
1/26
Next page
Installation
Before you begin to install
Before you begin you need to read the manual, to have
some tools, cables and other material available. There
is one such list of material on the following page.
Amplifier location
Important
Allow air circulation around the amplifier.
2
Disconnect Battery
Before starting the instal-
lation, always disconnect
the negative terminal of
the battery.
The DLS ULTIMATE amplifiers have a great
flexibility in mounting but the best is to mount it
somewhere in the trunk.
When you select a location, do remember that the
amplifier generates a lot of heat.
Choose a location where air can circulate freely
around the amplifier. Do not cover the amplifier with
carpets or hide behind trim panels.
Do NOT mount the amplifier upside down under
the hat rack.
In the amplifier case there are four mounting holes.
If the surface where you intend to mount the
amplifier isn´t big enough you can mount it on a
separate fibre board or similar. This will also isolate
the amplifier chassies from ground.
WARNING!
Check all locations and placements carefully before
making any cuts, drilling any holes or making any
connections.
ULTIMATE A-series
CAUTION!
Some of our amplifiers are capable of producing a sound pressure level that can cause permanent
damage to your hearing system. High sound pressure levels combined with long time listening can give
permanent damage to your hearing system. Choose a listening level that is comfortable for your ears.
To establish a safe level:
Start your volume control at a low setting. Slowly increase the volume until you can hear the music
comfortly and clearly, without any distortion. Sudden sound shocks are dangerous.
The following noises can be dangerous with constant exposure:
90 dB Subway, motorcycle, lawn mover 4 hours max
100 dB Chain saw 2 hours max
120 dB Rock band live concert 30 minutes max
140 dB Gunshot blast, jet plane 0 minutes
Professional Tip:
If amplifier installation kits are available with diffe-
rent size of power cable, chose the most heavy power
cable to improve sound quality and to allow more
amplifiers to be installed now or later.
These are the minimum sizes of power cables we
recommend for the different models:
Cable length:< 1,5 m 1,5 - 4 m >4 m
A2 10 mm
2
16 mm
2
21 mm
2
A3 / A4 / A5 16 mm
2
21 mm
2
33 mm
2
A6 21 mm
2
33 mm
2
50 mm
2
A7 16 mm
2
21 mm
2
33 mm
2
A8 10 mm
2
16 mm
2
21 mm
2
The ground cable must have the same size.
Max fuse values for different cable sizes:
6 mm
2
(9 AWG) :25 A 10 mm
2
(7AWG) :40 A
16 mm
2
(5AWG) :60 A 21 mm
2
(4AWG) :100 A
33 mm
2
(2AWG) :150 A 42 mm
2
(1AWG) :200 A
Congratulations, you have just purchased the finest mobile audio amplifier that today´s technology can
offer. DLS offers a series of high quality car audio products for real music lovers, and we are sure that you
will enjoy a high class car sound for many years.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DLS a7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DLS a7 in the language / languages: English as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info