649008

DKN RunTech-A Manual

60
Zoom out
Zoom in
Previous page
1/62
Next page
60
Code
Description
Processing
E01
Communication error. The control board and
computer are not communicating correctly.
The machine stops and goes into fault status, computer shows “E1”, and the alarm beeps
three times. Possible causes: check all the connection points between the console and
controller. Make sure all plugs are well connected. Check all the wires for damage. If this
fails, change the connector wires.
E04
Incline error
Incline motor induction wire or AC line is not well connected. Unplug and reconnect the
lines correctly.
Erratic incline signal. Replace the control board
Potentio meter on the incline motor is broken. Replace the incline motor
E05
Over-current protection.
(6A overload for 3 seconds or more)
Stops and goes into fault status, computer shows “E05”. Other areas show blank. After 10
seconds the machine will go into ready mode, and can be restarted.
Possible causes: system encounters overvoltage and goes to self-preservation. Moving
parts may be blocked. Check and adjust the machine and restart. Check motor or
controller for burning smell. If so, change motor and/or controller. Check whether the
power voltage is too low or not to standard and retest with the correct voltage
E06
Control board self-check error.
Check incline motor sense wire and AC wire are inserted well; AC wire is right inserted
according to the indentify in the incline motor; make sure the incline motor wire without
damager; after check those, if the faulty still exists, then please change the controller.
E08
EPROM (Data memory error)
Computer shows“E08”. Possible causes: the controller wires are not connected well,
check and reconnect or change.
… 60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DKN RunTech-A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DKN RunTech-A in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info