704359
26
Zoom out
Zoom in
Previous page
1/30
Next page
RONIN-SC
User Manual
24
© 2019 DJI OSMO All Rights Reserved.
Control Settings
Channels
The channel indicator provides feedback when conguring remote operation. Pan, tilt, and roll channels
can be reassigned and each axis can also be inverted. Normal means the direction of movement is the
same as the joystick. Inverted means the direction of movement is the opposite of the joystick.
When using the joystick, you can only control CH1 and CH3, which is mapped to tilt and pan axes by
default. You can customize channel mapping by tapping on the name of the axis on the right of the screen.
Motion
You can set the joystick control by adjusting deadband, max speed, smoothing, and endpoints for each
axis. There are three default proles for each settings.
Deadband: When the deadband value increases, more stick movement will be required to translate into the
actual movement of the gimbal.
Max Speed: Allows the remote-controlled rotational speed to be adjusted
Smoothing: Allows you to control the sensitivity of the gimbal. The lower the smoothing value, the more
sensitive the movement of the gimbal.
Endpoint: Limits the rotational range of the gimbal by setting the endpoints. The pan axis has a slip-ring,
enabling Ronin-SC to rotate continuously when the endpoints are set to 180°. On the tilt axis, you can set
up the endpoints according to your requirements. Some longer lenses may hit the gimbal frame. Set the
endpoint angle to prevent such cases.
Status
Settings
Motor Pause: Tap to enable motor pause and the motor will power off.
Disable Selfie Mode: Tap to disable Selfie mode to prevent accidentally entering selfie mode and
interrupting recording.
System Calibration: Use only if you notice drift on any of the axes. Tap and then select Calibrate System.
Make sure the calibration is complete before picking up Ronin-SC.
Restore Gimbal Setup: Tap to restore the motor parameters of the gimbal, Follow mode, and control
settings to default.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DJI Ronin-SC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DJI Ronin-SC in the language / languages: English as an attachment in your email.

The manual is 10,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info