612035
33
Zoom out
Zoom in
Previous page
1/35
Next page
©
2015 DJI. All Rights Reserved.
33
Troubleshooting
Problem Solution
1 Motors appear to be weak After balancing the camera, launch the DJI Assistant App or the
DJI PC/MAC Assistant and press Auto Tune Stability. Wait for 
the process to nish and the stiffness settings will be displayed 
on the screen.
2 The gimbal is vibrating,
even after tapping the
Auto Tune Stability button
(1) Check to make sure all knobs are tight, including the pan
motor knob.
(2) Check to make sure the camera screw is tight. Push on the
camera plate to make sure it is not loose or sliding on the
gimbal’s camera mount.
(3) Try decreasing the stiffness setting of each axis. By looking 
at the "Power" readings for the axes, you should be able to 
tell if there is one particular axis being affected.
3 Pan axis seems to be 
off-center
Open the DJI Assistant App or DJI PC/MAC Assistant, select the
Calibrate Center and follow the on-screen instructions.
4 Ronin-M seems to be
drifting
Place the Ronin-M on the Tuning Stand and enter the DJI Assistant 
App or the DJI PC/MAC Assistant. Tap/click the Calibrate System 
button and let the process nish before picking up the Ronin-M.
5 SmoothTrack does not 
work
(1) Turn on the remote control and be sure that the MODE 
switch is not in Position 1 (the uppermost position).
(2) Check whether SmoothTrack is turned off in the DJI Assistant 
App or the DJI PC/MAC Assistant software.
(3) Check whether the SmoothTrack deadband is turned up too 
high. If it is, reduce the deadband value in the SmoothTrack 
Menu.
6 Motors turn off
automatically
Check your camera balance. If the power level in the Gimbal
Motors Menu indicates an output of 10 or more, on any axis, 
rebalance the camera.
7 Gimbal turns off and
doesn’t come back on
Restart the gimbal. There is a motor protection algorithm built
into the Ronin-M to protect the electronic components. If any
particular motor enters a protection mode (motor shuts off six 
times within a one minute period), the Ronin-M will deactivate
the motors and will not reactivate them until the unit has been
restarted.
8 Forgot the Bluetooth
password
Connect the Ronin-M to the DJI PC/MAC Assistant and click the
"Reset Password" button to reset the password. 
9 Video footage appears to
wobble from side-to-side
or up-and-down
The SmoothTrack speed setting is too high or the SmoothTrack 
deadband setting is too low. Decrease the SmoothTrack speed 
or increase the deadband.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DJI Ronin M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DJI Ronin M in the language / languages: English as an attachment in your email.

The manual is 10,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info