652881
9
Zoom out
Zoom in
Previous page
1/11
Next page
ANLEGEN UND ANWENDUNG
D
9
5.0 Anlegen und Anwenden des EMS-Bauchmuskelgürtels
Schritt 2:
Beim Anlegen des Bauchmuskelgürtels darauf achten, dass die Elektroden „D“ vom
optimal auf den Bauch mittig positioniert sind und vollflächig
anliegen. Die Elektroden “D“ siehe Bild 3 müssen direkt auf der Haut aufliegen.
Achten Sie darauf, dass sich kein Kleidungsstück oder sonstiger Gegenstand zwischen
den Elektroden und der Haut befindet.
EMS-Bauchmuskelgürtel
Schritt 3:.
Legen Sie den Bauchmuskelgürtel nun um Ihre Taille und verschließen sie die beiden
Gurtenden „A“ und „B“ und schließen Sie den Klettverschluss. Der Bauchmuskelgürtel
ist aus einem dehnbahren Material, somit können Sie die passende Taillengröße
einstellen. Achten Sie darauf, dass dieser eng genug anliegt, Sie aber nicht einschnürt.
Schritt 4:
Jetzt können Sie das EMS-Gerät mit den Anschlussbuchsen (A Bild 3) verbinden.
Achten Sie darauf, dass das Stimulationsgerät (EMS) beim Anschließen ausgeschaltet
ist. Nachdem die Verbindung hergestellt ist, können Sie nun mit der EMS-Anwendung
beginnen. Die Impulse fließen im angelegten Zustand zwischen den beiden Elektroden.
Beachten Sie die Gebrauchsanweisung des EMS-Gerätes. Stellen Sie die Intensität so
ein, dass Sie eine Muskelkontraktion spüren und der Impuls noch angenehm ist.
Schritt 1:
Zur EMS-Anwendung müssen Sie zuerst die 2 Elektroden „D“ siehe Bild 3 und Ihren
Bauch mit etwas Wasser gleichmäßig anfeuchten, damit sich keine punktuelle Strom-
dichte bilden kann. Am besten mit einem leicht angefeuchtetem Tuch. Vor jeder An-
wendung sollte Ihre Haut sauber von Körperölen und Hautcreme sein.
Anwendung mit einem Stimulationsgerät (EMS)
Schritt 5:
Möchten Sie die Anwendung beenden, muss zuerst das Stimulationsgerät ausge-
schaltet werden. Anschließend können Sie die Steckverbindungen (A Bild 3) mit den
Anschlussbuchsen (A Bild 3) lösen und den ablegen. Ziehen
Sie nicht an den Kabeln vom Bauchmuskelgürtel.
EMS-Bauchmuskelgürtel
A. Anschlussbuchsen,
rot und schwarz
C. Gurtende B
mit Klettverschluss
(Hacken)
D. 2 Elektroden
E. Gurtende A
mit Klettverschluss
(Schlaufen)
Bild 3
B. Kontaktabdeckungen
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dittmann BGE 291 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dittmann BGE 291 in the language / languages: German as an attachment in your email.

The manual is 1,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info