672730
44
Zoom out
Zoom in
Previous page
1/46
Next page
44
IP2246EN
Type of
alarm
Display Description Operation
Radio operations alarm
R0 - Insertion of a storage module contain-
ing over 100 stored remote controls
Warning: the
setting is
made automatically.
To save the system configurations on the
storage module, delete any stored remote
controls and bring the total to less than
100. Set
.
R3 - Storage module not detected Insert a storage module.
R4 - Storage module not compatible with
the control panel
Insert a compatible storage module.
R5 - No serial communication with the
storage module
Replace the storage module.
R6 - Insertion of a specific storage module
for testing
Power supply
alarm
P0 - No mains voltage Check the control panel is powered cor-
rectly.
Check the line fuse.
Check the mains power supply.
P1 - Microswitch voltage too low Check the control panel is powered cor-
rectly.
Battery
alarm
B0 - Battery almost flat Check battery voltage.
Replace battery.
Accessories alarm
A0 - Failure of test of safety sensor on con-
tact 6
Check the device SOFA1-A2 is working
correctly.
If the supplementary SOF board is not insert-
ed, check the safety test is disabled.
A1 - Simultaneous safety sensor test on
contacts 6 and 8 failed
Check the wiring and correct operation of
the safety sensor.
A3 - Failure of test of safety sensor on con-
tact 8
Check the device SOFA1-A2 is working
correctly.
If the supplementary SOF board is not insert-
ed, check the safety test is disabled.
A7 - Incorrect connection of contact 9 to
terminal 41
Check that terminal 1 and 9 are correctly
connected.
A9 - Overload on output +LP- Check the device connected to output +LP- is
working properly.
AB - Overload on output 30-13 Check the device connected to output 30-
13 is working properly.
AG - Alarm for short-circuit on output -LK+ Check the device connected to output -LK+
is working properly.
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DITEC LUC40H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DITEC LUC40H in the language / languages: English as an attachment in your email.

The manual is 2,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info