591008

Dirt Devil CV 1500 Manual

8
Zoom out
Zoom in
Previous page
1/12
Next page
VACPAN
™
II
OPERATING INSTRUCTIONS
VACPAN
™
II
INSTALLATION INSTRUCTIONS
VacPanII can be used as both an automatic dustpan and a standard hose inlet.
For automatic dustpan operation, slide top cover up, creating a sweep opening and
automatically switching on central vacuum system. Sweep material into opening. When
complete, slide top cover down, automatically shutting off central vacuum system.
For Standard Hose Inlet operation, ensure top cover is in fully lowered position. Grasp
side finger grips in top cover and flip top cover up. The top cover will lock out of the way.
Lift sprung flapper door open and insert central vacuum hose. Use your central vacuum
hose as you would with any other standard inlet valve.
1. VacPanII Wall Mount can be installed inside any wall with a minimum stud width
of 2-3/4".
2. VacPanII should be located against wall stud.
3. Once the VacPanII location is determined and prior to applying the wallboard,
attach Standard Mounting Bracket to the wall stud so that the center of the
mounting plate is 4" above the subfloor.
4. Attach VacPanII base stopper bracket, thereby allowing appropriated space for
final installation.
5. Run vacuum tube piping and low voltage wire from the main line to VacPanII
location and attach to mounting bracket.
6. Snap off two protruding tabs of VacPanII base stopper bracket and discard.
7. Align VacPanII with mounting bracket. Height adjustment may be required
depending on finished floor.
8. For VacPanII height adjustment: The body can be shortened by scoring along
Quick-Trim Grooves on back of body. The two-piece front cover can be adjusted
for height by twisting apart and engaging the mating teeth of the two parts. The
VacPanII entrance ramp can be slid on mating body grooves.
9. Attach low voltage wires to VacPanII terminal connections.
10. Slide VacPanII into mounting bracket and secure to wall using two #10 x 1-1/2"
screws provided. CAUTION: Do not over-tighten mounting screws as VacPanII
operation can be affected.
7
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dirt Devil CV 1500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dirt Devil CV 1500 in the language / languages: English as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info