Manual Directed Electronics 250 (page 21 of 22) (English)

583776

Zoom out

Zoom in

1/22

2001 Directed Electronics, Inc.

QUICK REFERENCE GUIDE

Arming the system with your remote:

■ Press of your transmitter for one second. When the system arms,

you will hear a short siren sound, or chirp, and see the parking lights

flash once.

Disarming the system with your remote:

■ Press again. You will hear two chirps, and the parking lights will

flash twice.

Disarming the system without your remote:

■ Turn on the ignition. Press the Valet switch within 15 seconds. The

system should now disarm. If it does not disarm, you may have waited

too long to press the Valet switch; turn the ignition off and on and try

again.

Silent Mode

™

■ Press briefly before arming or disarming, and the confirmation

chirp(s) will be eliminated for that one operation only.

Panic Mode:

■ Press for 1.5 seconds, and you will enter Panic Mode. The siren will

sound and the parking lights will flash for 30 seconds. To stop Panic

Mode at any time, press on the transmitter again.

To enter or exit Valet Mode with the Valet switch:

■ Turn the ignition to the ON position, then turn to the OFF position.

Press and release the Valet switch within 10 seconds.

Remote Valet:

■ You can also enter or exit Valet Mode by using the remote transmitter.

First, open any vehicle door. Then press . Press . Press

again. The status LED will light solidly if you have entered Valet Mode

and will turn off if you have exited Valet Mode.

Cut along dotted line and fold for a quick and easy reference to keep in your purse or wallet.

✂✂

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Directed Electronics 250 in the language / languages: English as an attachment in your email.

The manual is 1,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Directed Electronics 250 Manual

Product: