798186
4
Zoom out
Zoom in
Previous page
1/16
Next page
2 452117.66.03-EN · FD 0201 www.glendimplex.de
English WPM Touch
1Safety notes
1.1 Symbols and markings
Particularly important information in these instructions is
marked with CAUTION! and NOTE.
!
!
CAUTION!
Immediate danger to life or danger of severe personal injury or
significant damage to property.
HINWEIS
ºººººº
NOTE
Risk of damage to property or minor personal injury or impor-
tant information with no further risk of personal injury or dam-
age to property.
1.2 Regulations and safety notes
During commissioning, observe the respective country-
specific safety regulations and the applicable VDE safety
regulations, particularly VDE 0100 as well as the technical
connection requirements of the utility companies (EVU)
and supply network operators!
The heat pump manager should only be operated in dry
rooms with temperatures ranging between 0 °C and 35 °C.
Ensure that no condensation forms on the device.
All sensor connecting cables with a conductor cross-sec-
tion of 0.75 mm² can be extended to a maximum of 40 m.
Sensor cables should not be installed next to power cables.
To ensure that the frost protection function of the heat
pump works properly, the heat pump controller must re-
main connected to the power supply and the flow must be
maintained through the heat pump at all times.
The switching contacts of the output relay are interfer-
ence-suppressed. Therefore, depending on the internal re-
sistance of the measuring instrument, a voltage can also be
measured when the contacts are open. However, this will
be much lower than the line voltage.
At the adapter boards -N1/SL, -N1/ML, -N17/LV as well as
the pins -N1/J9 .. J14 and J29 and -N17/J6 and J9, an
extra-low voltage is present. If, due to a wiring error, the line
voltage is mistakenly connected to these terminals, the
heat pump manager will be destroyed.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dimplex WPM Touch - FD0004 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dimplex WPM Touch - FD0004 in the language / languages: English as an attachment in your email.

The manual is 0.67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Dimplex WPM Touch - FD0004

Dimplex WPM Touch - FD0004 User Manual - German - 16 pages

Dimplex WPM Touch - FD0004 User Manual - Dutch - 16 pages

Dimplex WPM Touch - FD0004 User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info