706338
56
Zoom out
Zoom in
Previous page
1/56
Next page
55 < < < <
6.8 Risoluzione dei problemi
Sintomo
Causa
Soluzione
L’effetto fiamma non parte.
La spina non è nella presa a
parete.
L’interruttore ”A” è nella
posizione ´ON´ ma
l’interruttore “B” non è stato
premuto.
Basso livello dell'acqua.
La spina sulla vasca di raccolta non
è collegata adeguatamente
(Vedi Fig. 9)
Mettere la spina nella presa a parete.
Premere l’interruttore “B”.(Vedi Fig.2)
Quando l’interruttore è in posizione “ON”
Riempire il serbatoio dell'acqua.
Controllare il collegamento dentro l’unità ( Vedi Fig. 9)
L'effetto fiamma è troppo
basso.
Il pulsante effetto fiammaC" è
collegato a bassa tensione
(Vedi Fig. 2)
Il livello dell’acqua nella vasca
di raccolta è troppo alto,
perché il cassetto è stato aperto
diverse volte, il serbatoio
dell’acqua è stato rimosso
diverse volte oppure il camino è
stato spostato.
I dischi di metallo nella vasca di
raccolta sono sporchi.
(Vedi Fig. 14)
Ruotare il pulsante “C” verso l’alto. (Vedi capitolo 1.5.2)
Quando il livello dell’acqua nella vasca di raccolta è
superiore a 40 mm, la vasca deve essere svuotata nel
lavandino.
Pulire i dischi di metallo con la spazzola in dotazione.
(Vedi capitolo 1.8.2)
Durante l’uso dellunità si
produce un odore
sgradevole.
Acqua sporca o stagnante.
È stata usata acqua di rubinetto
non filtrata.
Pulire l'unità come descritto nel capitolo 1.8.
Usare solo acqua di rubinetto filtrata.
L'effetto fiamma produce
troppo fumo.
Il pulsante effetto fiamma “C" è
troppo basso.
Ruotare il pulsante effetto fiamma Cverso il basso
(Vedi capitolo 1.5.2).
Ruotare lentamente fino a raggiungere l’effetto desiderato.
Ruotare il pulsante un quarto verso destra e dare al
generatore di fiamma il tempo di regolarsi.
Le lampadine non
funzionano e non è visibile
del fumo.
Il serbatoio è vuoto.
L’unità non è stata collegata
correttamente.
Il dispositivo è spento.
Riempire il serbatoio (Vedi capitolo 1.7.2).
Accertarsi che la spina sia inserita correttamente nella
presa a parete.
Mettere l’interruttore “A" in posizione "ON” e/o
Premere l’interruttore “B” una volta fino a udire un
“beep”.
Condensa sul vetro.
La superficie del vetro è fredda.
Abbassare l'effetto fiamma durante questa operazione.
Incrostazione sul vetro.
È stata usata acqua di rubinetto
non filtrata.
Utilizzare acqua filtrata.
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dimplex Gala opti-myst at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dimplex Gala opti-myst in the language / languages: English, German, Dutch, Danish, French, Italian as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info