499319
11
Zoom out
Zoom in
Previous page
1/14
Next page
.10.
Instruction Manual
AUTO TUNING
This method of tuning will quickly search for and automatically store in order of reception TV stations located in your area.Make
sure that an external aerial is connected and that the TV is switched on with TV mode selected. Use the remote control to make all
the adjustments
1.Press the MENU button.
2.Press the CH- button repeatedly until TUNING is highlighted.
3.Press VOL+ button.
4.Press CH- button repeatedly until AU
TO SEARCH is highlighted.
5.Press the VOL+ button to start the Auto Tuning. The tuning process will take a few minutes to complete and you will see TV stations
briefly as they are located and automatically stored in order of reception. When tuning has completed you will see the first TV station
stored behind the tuning menu. Press the MENU button twice to return the TV to its normal operation showing a TV station store
d
in P1 memory location. Press the CH+ or CH- button to change the TV channels.
SKIP: Any noisy / unwanted stations can be removed by using the SKI
P function as follows:
1.Select the noisy/unwanted TV channel using the CH+/CH- button
.
2.Press MENU button
3.Press the CH- button repeatedly until TUNING is highlighted.
6.Press the VOL+ button to change the SKI
P state from OFF to ON.
7.Press the MENU button twice to exit the menu. The Noisy / unwanted TV station will no longer be shown when cycling through
the channels using the P+/P- button. In the same manner described above other channels can be removed.
CHANNEL SWAP
If you want to swap the channel,you should operate as the following measures:
(1)Press the "swap" button,and it will show a signal "EX ---" on the left corner of LCD panel.
(2)Input the channel number which you want to change to by press the numeric ke
y.
(3)Press the button "VOL+",and the swap has been done.
MAN
UAL TUNING METHOD
This method of tuning will allow manual search and storage of TV stations in to your own preferred stored order. Eg. BBC1 in location1
1.Press the MENU button.
2.Press the CH- button to highlight TUNING
3.Press the VOL- button to select.
4.Press the CH+/CH- button and highlight CHANNEL.
5.Press the VOL+/VOL- button and selected the channel number that you wish to store the TV channel into.
6.Press the CH- button repeatedly until MANUA
L SEARCH is highlighted.
7.Press the VOL+ button to enter the tuning menu. Press the VOL+ button until UHF band shows.
8.Press the CH+ button to select tuning direction for U
P the band.
9.Press the VOL+ button to start the manual tuning process. The tuning will stop once a TV station is located. If this an incorrect or
noisy/non station then press the VOL+ button to continue the scan.Note :you may need to use a TV Guide to identify the number the
10.Once the correct TV station has been located press the Menu button twice to return the TV to its normal operation. The TV
station is automatically stored in the previously selected preset memory location.
11.In the same manner described above repeat the instructions to tune in and store other TV stations. Make sure that you change
the channel number that you want to store the next station as detailed in “5” above.
TUNING
4.Press the VOL+ button to select.
5.Press the CH- button until skip is highlighted
channel you have tuned in.e.g.BBC1,etc..
BBC2 in location2,etc..
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Digitrex JTF1500RE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Digitrex JTF1500RE in the language / languages: English as an attachment in your email.

The manual is 1,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info