521997
2
Zoom out
Zoom in
Previous page
1/2
Next page
DIGITAL YACHT LTD
ANT200 Quick Start Guide
3. Installation
Before starting installation select a suitable location for the ANT200 AIS Receiver. The unit is water proof and designed
for on-deck mounting. The ANT200 antenna has the popular 1” x 14 TPI thread mount, found in many VHF antennas. A
wide variety of different brackets are available for this type of threaded mount, consult your local marine electronics
dealer or chandlery for more information.
The 1” x 14 TPI thread mount can also be removed, allowing the ANT200 to be flush mounted on a flat horizontal surface.
The ANT200 is supplied with 15m of cable and this should be routed through the vessel to a suitable dry internal location
where it can be connected to the boat’s DC power system and the equipment it will be interfaced with. The cable can be
shortened, lengthened or joined without problems.
The ANT200 should be connected to the boat’s DC supply via a 1 Amp fuse. The unit requires 9.6V to 28.8V supply
voltage.
Below are the wiring details for the ANT200 and a connection diagram that shows how to interface it to other navigational
equipment.
Wiring Colours;
Red
Power + (12v or 24v)
Black
Power (0v)
Grey
NMEA Out + (AIS+GPS data)@38400
Brown
NMEA Out -
Yellow
NMEA In+ (GPS data)@4800
Green
NMEA In-
Connection Diagram;
NOTE: Connection of the GPS Unit to the ANT200 is not mandatory but can be useful in
some installations where the dedicated chart plotter only has one NMEA Input port
www.busse-yachtshop.de | info@busse-yachtshop.de
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Digital Yacht ANT200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Digital Yacht ANT200 in the language / languages: English as an attachment in your email.

The manual is 0,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info