739131
10
Zoom out
Zoom in
Previous page
1/10
Next page
15 16
Troubleshooting
Error Cause Solution
When in charging, press
the START button and
the vacuum won’t back
off and starts cleaning.
And the light turns red
with 3 beeps
Switch button is turned
off
Turn on the switch
button and press the
START button again
The vacuum is connected
to the adaptor directly
for charging
Cut off the power and
turn on the switch
button
The inside fan doesn’t
work when installing the
dust bin
Inappropriate installment
of dust bin
Re-install the dust bin
Magnet of dust bin gets
lost
Contact the seller
Fan failure Contact the seller
The vacuum keeps acting
like: back- swing from
left to right- back- turn
around
Foreign body in roller
brush tank
Clean the roller brush
tank
The vacuum keeps acting
like: back- turn in circles
or keep turning in circles
Front sensors get
covered by dust
Clean the sensors
Cliff sensors get covered
by dust
The vacuum acts like:
back -turn around for 3
times when cleaning
Front bumper gets stuck
Gently pull and pat the
front bumper
The vacuum acts like:
back -turn around every
2-3 seconds when
cleaning and without any
other trouble
Nose wheel failure
Move the nose wheel by
hand and check if it gets
stuck
Errors and solutions
Troubleshooting
Product specifications
Item Specifications
Diameter 305mm
Height 75mm
Net weight 3kg
Voltage
14.8V
Battery Li-ion 2600mAh
Dust bin capacity 350ml
Charging type Auto
Cleaning modes Auto, spot, edge, scheduling
Charging hour 5 hours
Working hour
150 minutes
10


Need help? Post your question in this forum.

Forumrules
1

Forum

dibea-gt200

Reset search

  • Why is the GT200 spinning in a single spot and stops? It's fully charged. But it's not working properly. Thank you Submitted on 29-8-2023 at 04:04

    Reply Report abuse
  • I recently changed the brushes on my robot ... But the left one is not spinning ..pls advise Submitted on 23-7-2023 at 04:30

    Reply Report abuse
    • I have the same problem a few months ago. Just bought a new motor and replace it. Later, I open up the faulty motor and oil it. It then works properly. So I have a spare motor now. Answered on 23-7-2023 at 10:08

      Vote up Report abuse
  • My robot have problem and when click on start button it turn to red light with bee bee sound Submitted on 14-5-2022 at 11:07

    Reply Report abuse
  • My robot not working when click on start button it have turn green light then red light Submitted on 14-5-2022 at 11:06

    Reply Report abuse
  • The robotic cleaner produces a dragging sound intermittently when in use. Pl advise. Thanks. Submitted on 2-7-2021 at 10:02

    Reply Report abuse
  • Every 2 second it changes direction hence remaining in a small zone. there is no problem with the wheels and i had cleaned the sensors hoping it will get alright Submitted on 30-1-2021 at 17:31

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dibea GT200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dibea GT200 in the language / languages: English as an attachment in your email.

The manual is 7,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info