739164
4
Zoom out
Zoom in
Previous page
1/4
Next page
5 6
A.How to drop dust and clean the dust cup
B.Change or cleaning the sponge and HEPA filter
1. Remove the dust cup from body.
2. Press the dust cup bottom release button, then the dust will fall down
automatically. Usually you may only do like this to drop the dust. (FIG. A)
3. If find the plastic filter system too dirty, please press the dust cup cover (forair
exhaust) release button, take out the filter assembly out of the dust cup, then you can
clean them with soft brush or wash them with water. You should dry them completely
before you use again.(FIG. B).
Suggestion: clean up after work, in order to facilitate the use of the follow-up.
You can put to the company the fuselage and accessories designed with charging
seat
for you.
1. Remove the dust cup from body.
2. Rotate the dust cup cover anticlockwise from“close” to “open”, take out the
dust cup cover. Draw out the sponge and HEPA filter set. (FIG. A)
3. Pull up the knob of the filter frame, and pull out the sponge filter and HEPA
filter from the case box. Cleaning the Sponge and HEPA filter by soft brush or rinse it in
lukewarm water and dry them completely before use again. All the filters are washable.
(we recommend you to clean the filters when feeling the suctionpower becoming weak.)
(FIG. B)
Note: The above filters should be equipped in correct places when work the
vacuum machine
FIG.A FIG.B
Push
Dust Cup Bottom
Release Button
Filter Assembly
(Plastic Centering
Filter System)
FIG.A FIG.B
Sponge and
HEPA Filter
TROUBLESHOOTING GUIDE
PROBLEM POSSIBLE REASON POSSIBLE SOLUTION
Machine doesn't work The battery may be no electricity
Check the battery for electric or
change the battery.
The machine can't suck ash
or suction is very weak
1. The DUST CUP may be full
2. Lack of battery power
1. Empty dust cup
(see page 7).
2.Connect the charger.
DUST ESCAPING
FROM VACUUM
1. Dust cup is full.
2.The dust filter dust cup or cup
bottom there may not be assembled
1. Empty dust cup .
2. Check to see if the dust at the
bottom of the cup lock button
VACUUM BRUSHES WILL NOT
PICK-UP
1. Dust cup is full.
1.Empty and clean dust cup
container.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dibea F6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dibea F6 in the language / languages: English as an attachment in your email.

The manual is 2,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info