739166
6
Zoom out
Zoom in
Previous page
1/7
Next page
7 8
Daily storage
Machine cleaning
For long-time storage, please place the machine in cool and dry place, and avoid direct
sunlight or humidity
Push the button under the machine body forward and the dust cup assembly will pop up
(refer to the previous installation instruction), making it easy to put the cup into a dustbin
or a garbage bag for dust removal.
As shown in the figure, press the bottom lock of dust cup to open the cup cover and
dump the dust.
Please separate the dust cup from the machine body (refer to the previous installation
instruction)
As shown in the figure, take out the top filter element of dust cup, and clean it with soft
hair brush or put the cup in warm water for washing. Before next using, please make sure
that the dust cup and filter element are dry (the filer element can be washed when the
suction power is weakened).
How to dump dust and clean the dust cup
Replace or clean the filter
Notice: Before using, please ensure all filters are installed
in correct position
3
During using
Please do not approach to the heater such as radiator and butt
Before using
To prevent damage caused by collision, please remove large and sharp objects. Don’t use it
for any inflammable objects or liquids, such as gasoline, cigarette or alcohol
Precautions and product maintenance
※Common faults and solutions
S/N
1
2
3
4
Fail to work
Fail to suck dust or weak
suction power
Dust leakage
Fail to suck dust after
connecting with floor brush
The battery is out of power
1、The dust cup is filled with dust
2、The battery power is low
1、The dust cup is filled with dust
2、 The battery power is low
The dust cup is filled with dust
Check whether the battery has
power or needs replacement
1、Clean the dust cup
2、Connect the power adapter
for charging
2、Connect the power adapter
for charging
Remove the dust and clean the
dust cup
If the three LED-lights on the battery pack turn red and
flash, it may have the following faults
1、Clean the dust cup and install
it correctly
Phenomenon
Possible cause
Solution
Common indication faults of fault indicating lamp
After the switch button is long pressed for more than 6s, the machine will be shut down
automatically and the three LED-lights turn red and flash. Press the switch button again to start the
machine
If the floor brush is blocked by foreign matters, the machine will not be shut down automatically,
but the three LED-lights will turn red and flash; shut down the machine, remove the foreign matters in
the floor bush, and press the switch button again to start the machine
If the internal temperature of machine is too high, the machine will start the overheat protection
function and be shut down automatically and the three LED-lights turn red and flash. Restart the
machine after its body is cool and it will recover to normal.
The machine will be short-circuited and shut down automatically after sucking liquid, and the
three LED-lights will turn red and flash quickly. Please don’t start/shut down the machine repeatedly.
Remove the battery for recharging and restart the machine after troubleshooting.
When the host motor is blocked by foreign matters, the machine will work intermittently in the
four “respiration” form and be shut down automatically. Please restart after removing the
foreign matters.
※Product parameters
Common faults and product
parameters
Rated power
Battery configuration
Charging time
Noise level
Outline dimension
Weight (net/gross weight)
Capacity of dust cup
180W
Li-ion 2200mAh 25.9V
4~5H
74dB
1172×256×217
2.4kg/3.8kg
500ml
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dibea F20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dibea F20 in the language / languages: English as an attachment in your email.

The manual is 2,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info