The cleaner is equipped with an automatic shut-off that operates when picking up liquids. As the level of the liquid rises, an internal oat rises until
it seats itself against a seal at the intake of the motor, shutting off suction. When this happens, the motor will develop a higher than normal pitch
noise. To continue use, empty the liquid waste from the tank as outlined in the previous paragraph.
NOTE: IF ACCIDENTALLY TIPPED OVER, THE VACUUM COULD CLOSE SUCTION. IF THIS OCCURS, PLACE VAC IN UPRIGHT POSITION
AND TURN SWITCH OFF. THIS WILL ALLOW THE FLOAT TO RETURN TO ITS NORMAL POSITION, AND YOU WILL BE ABLE TO
CONTINUE OPERATION.
This vacuum can be used as a powerful blower. To use your unit as a blower insert hose end into the top exhaust port. Clear hose of any
obstructions before attaching to blower port. Caution should be used when using as a blower due to the powerful force of air when using certain
attachments.
Before storing your vacuum cleaner the tank should be emptied and cleaned. The power cord can be wound around the housing of the unit for
convenience. The accessories can be stored on the accessories holder of the caster dolly.
The cleaner should be stored indoors.
WARNING-
ALWAYS WEAR EYE PRTECTION TO PREVENT ROCKS OR DEBRIS FROM BEING BLOWN OR RICOCHETING INTO THE EYES
OR FACE WHICH CAN RESULT IN SERIOUS INJURY.
WARNING-
REDUCE THE RISK OF INJURY FROM MOVING PARTS AND/OR ELECTRICAL SHOCK, TURN POWER SWITCH OFF AND
DISCONNECT PLUG FROM ELECTRICAL OUTLET BEFORE PERFORMING TROUBLESHOOTING CHECKS.
NOTE: No lubrication is necessary as the motor is equipped with lifetime lubricated bearings. For product service or any other service
please contact Agent customer service or an authorized service representative. Minor problems often can be xed without calling Agent
Customer Service according to above chart.
WARNING-
IF ANY OF THE MOTOR HOUSING PARTS SHOULD BECOME DETACHED OR BROKEN, EXPOSING THE MOTOR OR ANY
OTHER ELECTRICAL COMPONENTS, OPERATION SHOULD BE DISCONTINUED IMMEDIATELY TO AVOID PERSONAL INJURY
OR FURTHER DAMAGE TO THE VACUUM. REPAIRS SHOULD BE MADE BEFORE REUSING THE VACUUM.
TROUBLETROUBLEREMEDY
Suction weakens or cleaner runs hot
Clogged lter
Brush dirt from lter. If condition continues, change
lter.
Air leak
Check all ttings for tight t (nozzle, hose, etc.) Check
that power head is sealed properly.
Obstruction in hose or nozzle
Check nozzle, hose, etc. for obstructions, and remove
if present.
Vacuum does not runNo electricity
Make sure electrical outlet has voltage. (A qualied
electrician may need to be contacted).
Misting in the exhaust airSaturated lterReplace saturated lter with a dry lter.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Dibea DU100 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Dibea DU100 in the language / languages: English as an attachment in your email.
The manual is 0,59 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
