740328
4
Zoom out
Zoom in
Previous page
1/5
Next page
IMPORTANT: Before transmitting on a channel, listen to ensure that it is not already in use.
CTCSS/DCS
Press the Menu/PWR button twice and use the Up/ Down to introduce CTCSS/DCS Continuous Tone-Coded Squelch System. CTCSS is a
circuit that is used to reduce the annoyance of listening to other users on a shared two-way radio communications channel. It basically
allows a private channel on a busy stream.
CTCSS = Coded Tone Controlled Squelching System. This allows you to talk on a private sub channel on an active channel. DCS is a
digital extension of CTCSS.
DCS = DCS is a digital extension of CTCSS. It provides extra, digitally coded and squelch codes that follow after the 38 CTCSS codes.
CTCSS 1 to 38 is followed by DCS 1-38.
VOX
Voice operated transmitter, it allows you to transmit with your voice without pressing the button.
Your communicator is equipped with an adjustable Voice Operated Transmitter (VOX) that can be used for automatic voice
transmission.
In this convenient mode, transmission is automatically initiated by speaking into the microphone. There is no need to push the button.
By pressing Menu/PWR button 3 times, screen will display VOX character, character OFF keeps flashing. Press Up or Down button to
select voice level (from 1 to 3 level or OFF).Press PTT button to confirm setting, VOX default setting is OFF.
CA
CA allows you to adjust different tones for calling the operator from the same channel.
Press Menu/PWR button 4 times, screen will display CA character, digital 01 keeps flashing. Press UP or Down button to select call tone
from 01 to10, then press PTT button to confirm call tone setting, the default setting for call tone is 01.
There are 10 mode call tones in this unit, you and the other party can use designed call tone to communicate separately and secretly to
avoid any disturb. To activate this feature, with the unit in normal mode, press the PTT button twice quickly and then release to send a
tone to other users on the same channel.
TOT
Time out timer means the unit will automatically stop transmitting after 30 or 60 seconds of continuous transmission.
Press Menu button 5 times, screen will display 60 s, press Up or Down button can choose 60 or 30 seconds. Default setting is 60
seconds, press the PTT button to confirm changes.
Roger Beep
Roger beep means a tone added to the end of broadcast, it indicates that the user/operator has finished speaking.
This is a tone which is automatically transmitted whenever the PTT button is released.
This alerts the receiving party that you have ended the transmission, and you are now in receive mode.
Press Menu button 6 times, screen will display ON or OFF, press Up or down button to choose ON or OFF, and press the PTT button to
confirm changes.
Key tone
A symbol will display when Key tone is opened.
Press Menu button 7 times, screen will display Bell ON, press Up /Scan button to choose ON or press Down/Moni button to choose
OFF.
Default setting is ON, press the PTT button to confirm changes.
DCM
Dual channel monitoring. You can monitor between two channels e.g. 1 to 8 or 9 to 22.
Press Menu button 8 times, screen will display DCM OFF, press Down or UP button to choose DCM OFF or ON, when choose DCM ON,
then press Menu/PWR button one time, scroll Up/Down button to choose channel, the channel cannot be same as main channel, press
the PTT button to confirm changes.
Transmitting (sending speech)
The unit is continuously in the receive mode when the unit is turned ON and not transmitting.
When a signal is received on the current channel, “RX” icon will be displayed on the LCD screen.
a. Press and hold the PTT (Push to Talk) button to transmit your voice. The transmit signal icon “TX” will display on the LCD screen.
b. Hold the unit in a vertical position with the Mic (Microphone) 5 cm away from the mouth. While holding the PTT button, speak
into the microphone in a normal tone of voice.
c. Release the PTT button when you have finished transmitting. For others to receive your transmission, they must be on the same
channel with you.
Reset the unit
Take away the battery from walkie talkie battery compartment, then hold the Menu/PWR button, meanwhile put back the battery to
walkie talkie battery compartment in right polarity, the unit will turn on and display CH 100, at this time, release the PWR button.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denver WTA-446 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denver WTA-446 in the language / languages: English as an attachment in your email.

The manual is 0,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denver WTA-446

Denver WTA-446 User Manual - German - 6 pages

Denver WTA-446 User Manual - Dutch - 5 pages

Denver WTA-446 User Manual - French - 5 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info