797175
8
Zoom out
Zoom in
Previous page
1/12
Next page
units display
To repeat the search, or press and hold the TX button(49) on the temperature/humidity/ wind sensor. You find
the TX button under the battery cover.
Placement of sensors
To ensure correct measurements, the temperature/humidity /wind sensor and the rain gauge sensor must be
placed at least 1.5m above the ground on a horizontal surface without buildings and structures nearby.
Mounting
Both sensors must be firmly attached to prevent them from falling and being damaged.Do not place the
sensors onto metal objects as this will reduce their transmission range.
To assemble and mount the temperature/humidity/wind sensor, begin with screwing the mounting base (51)
onto a level surface. Place the mounting rod(50) in the base and fasten it with two screws. Put the
temperature/humidity/wind
Sensor on top of the rod. Before fastening it, make sure that the wind can flow freely around the wind sensor
from all sides. Check that the wind cups and wind paddle(48)for measuring wind speed and directino can
rotate freely.
Improtant. To make sure that the wind direction is measured correctly, it is important that you install the
temperature/ humidity/wind sensor in north-south direction using the built-in compass(47).The part with the
wind cups and wind
Cups and wind direction paddle should face south. See picture.
When you have aligned the temperature/ humidity wind sensor in north-south direction, fasten the sensor to
the mounting rod with two screws. Lastly, mount the rain gauge sensor by screwing it onto a suitable surface
and place the grille (45) in the sensor.
Weather forecasts
The weather station will start a 14- day learning process once turned on and set up. This learning process is
necessary for the weather station to be able to make weather forecasts. The display will show “LEARNING...“ at
The top of the display during this time.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denver WS650 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denver WS650 in the language / languages: English as an attachment in your email.

The manual is 1.82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denver WS650

Denver WS650 User Manual - German - 10 pages

Denver WS650 User Manual - Dutch - 10 pages

Denver WS650 User Manual - French - 10 pages

Denver WS650 User Manual - Spanish - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info