751246

Denver WRD-50 Manual

5
Zoom out
Zoom in
Previous page
1/9
Next page
5
4.3. Sound playback from an external device
The AUX IN connection can be used to play sound from a different playback device (for example, an MP3
player) on the radio’s loudspeakers.
► Switch off your external device.
► To access the AUX IN jack, open the storage cover on the rear of the device by turning the storage
lock towards the unlock icon.
► Plug one end of an audio cable into the AUX IN jack (3.5 mm)
► Connect the other end of the audio cable to your external device (for example, AUX/LINE OUT)..
► Switch this device, and press the MODE/AL-ON button until “Enter AUX” appears in the display.
► Switch your external device on and the sound from your external device will be played via the
loudspeakers of this device.
► For protection of your external device from water splashes and dirt, you can place it into the storage
compartment of this device. Close the storage cover by turning the storage lock towards the lock icon
4.4. Bluetooth operation
4.4.1. Play from Bluetooth-enabled devices
► Press the MODE/AL-ON button until “bluetooth” appears on the display. “Not Connected” begins to
flash.
► On your Bluetooth device, enable Bluetooth and search for Bluetooth devices.
► When “WRD-50” is displayed on your device, select it to start pairing and connection. If necessary,
enter default password “0000”.
► After successful connection, “connected” flashes.
► Play audio on the Bluetooth device. When the play is paused, “connected” flashes.
5. System
Time/Date
Set Time/Date: The date and time are displayed as hh: mm_dd-mm-yyyy, dd, active (flashing).
Auto Update: Auto-update works with data sent over DAB or FM. The clock is only updated in a
corresponding radio mode, so it is best to select a radio mode you use regularly.
Time signals are transmitted with DAB or FM radio broadcast.
Set 12/24 hour: Select hour display format between 12 and 24 hour
Set date format: Select date display format among dd-mm-yyyy, mm-yy-dd and yy-dd-mm
Alarm setting
To set an alarm, press the MODE/AL-ON or MENU/INFO button, then select Menu > Main menu >
Alarms.
Select the alarm number (1 or 2) then configure the following parameters:
Time: 06:00 (adjust as necessary)
Ringing alarm time: 15 Mins/30 Mins/45Mins/60Mins/90Mins
Ringing alarm Mode: Buzzer/FM/DAB (FM or DAB Preset: Last listened or 1-20)
Enable: Daily/Once/Weekends/ Weekdays,
Volume: 0 – 16
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denver WRD-50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denver WRD-50 in the language / languages: English as an attachment in your email.

The manual is 0,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denver WRD-50

Denver WRD-50 User Manual - German - 9 pages

Denver WRD-50 User Manual - Dutch - 9 pages

Denver WRD-50 User Manual - French - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info