751211
4
Zoom out
Zoom in
Previous page
1/72
Next page
Carefully raise the tone arm.
Place the stylus vertically over the first track of the record; the turntable will
start turning automatically.
Lower the tone arm slowly on to the record.
When a record comes to the end, the turntable will stop automatically if the
auto-stop switch is in the ON position. If the switch is in the off position the
record will keep turning.
Lift up the tone arm and replace it on the tone arm rest.
Replace the protective cap on the stylus and close the tone arm lock.
Press the On/Off button to turn the turntable off.
Bluetooth function
Turn on the turntable and make sure the tone arm is on the rest.
The turntable will prompt to indicate entering Bluetooth function.
Enable the Bluetooth function on your smartphone and look for the “VPL-210”
Bluetooth device.
Once connected, you will hear a short voice prompt.
With the Previous Track, Pause/Play/Delete and Next Track buttons you can
control the choice of music on the turntable.
When you disconnect Bluetooth on your smartphone, you will hear a short
voice prompt.
Recording on USB stick / SD card
Connect a USB stick to the turntable’s USB port or insert an SD card into the
card reader.
Place a record on the turntable (see the Chapter “Playing a record”).
To start recording, press and hold the Mode button for about 2 seconds; a
beep tone indicates the start of the recording.
Place the tone arm on the record. The record is recorded in MP3 file format on
the inserted media (USB stick or SD card).
When the recording stops, press and hold the Mode button again for 2
seconds. Two beeps indicate the end of the recording. The recorded music will
be saved in the “RECORD0” folder on your USB stick or SD card.
Tracks are recorded in alphabetical order in the folder.
After recording, press the Mode button to play the recorded song.
To erase tracks from USB stick or SD card, press and hold the
Pause/Play/Delete button for 2 seconds while playing the track to be erased; a
beep tone indicates that the track has been erased.
Playback from USB stick or SD card
Connect a USB stick to the turntable’s USB port or insert an SD card into the
card reader; the media should only contain MP3 files.
The turntable prompts entering USB or SD function.
4
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denver VPL-210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denver VPL-210 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info