751222
12
Zoom out
Zoom in
Previous page
1/23
Next page
12
Power On: Long press the power button until the display lights up.
Power Off: Long press the power button until the display goes out and the system is off.
1. Battery power display: it shows the current remaining battery capacity.
2. Power off automatically: After the display is idle for more than 5 minutes, the Electric scooter
automatically turns off.
Change display information: When the Electric scooter is on, short press the power button , change
the showing data on the display, TIME, ODO, DIS and other characters respectively. When it is showing
time, it indicates the running time after switching on. The time will be cleared after switching off. When
it is showing DIS, it indicates the driving distance after switching on, and it will be cleared after power off.
When it is showing ODO, it indicates the total mileage, which will be retained unless it is manually
cleared.
Change the gear: Short press or button to change the gear level (Gear 3 is fast speed, Gear 2 is
medium speed, and Gear 1 is slow speed).
Acceleration: Gently press the accelerator button to speed up (The depth of the press is related to the
gear level you have set).
Deceleration: Gently press the deceleration dial to slow down. The deeper the press, the greater the
deceleration (the deceleration is relevant to the formation of the press, and pushing too hard can not
increase the braking force and may cause damage to the brake dial).
Clear total mileage: Press and buttons at the same time, then press the power button to
switch on the Electric scooter, and the total mileage will be cleared.
Important: Press and buttons at the same time, then press the power button and select P3
mode, when parameter value is 0, it will start with zero. When parameter value is 1, it will start with non
-zero.
(Zero start: When starting, the Electric scooter in a stationary case, press the accelerator to start driving.)
(Non-zero start: When starting, the Electric scooter is static, press the accelerator and the Electric
scooter does not work, push the Electric scooter manually to start driving, the Electric scooter works.
factory default is non-zero start. )
You have to manually move the Electric scooter with your foot before the accelerator button works.
9Electric scooter riding
Battery level
Gear level
Single mileage
Time
KM
Speed
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denver SEL-80125F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denver SEL-80125F in the language / languages: English as an attachment in your email.

The manual is 1,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denver SEL-80125F

Denver SEL-80125F User Manual - German - 25 pages

Denver SEL-80125F User Manual - Dutch - 24 pages

Denver SEL-80125F User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info