751134

Denver MRD-52 Manual

4
Zoom out
Zoom in
Previous page
1/17
Next page
EN
4
SETUP
Positioning the Retro Turntable
Where will your Retro Turntable and speakers be situated? If you place the Retro
Turntable on the same surface and very close to the speakers, the sound quality can
be affected by the airborne movements coming from the speakers and from any
vibrations from the surface on which they have been placed.
If at all possible, it is recommended that you leave a space of approximately 40cm
between each speaker. The Retro Turntable and the surface on which you have
placed the Retro Turntable and speakers, does not suffer from too much vibration,
which can then be transmitted up into the Retro Turntable. Please make sure that:
• The Retro Turntable and speakers are on a flat and stable surface, which does
not suffer from too much vibration. If you can, place the speakers on a different
surface to the Retro Turntable.
• It is at least 1 meter away from other electrical appliances to avoid interference.
• It is within 1.4 meters of a power socket. Please ensure that the mains power lead
and speaker wires are not a trip hazard.
• It is where it will be in range of the connected or 'paired' bluetooth devices (e.g.
iPod/ iPhone/iPad/ Android/other phone/Computer), which is about 10 meters or
fewer (33 feet or less) in line of sight.
• You do not place your Retro Turntable or speakers directly onto antique or
polished surfaces..
Setting up
1. Remove any product packaging materials, including any tape or foam that have
been used to protect the product during transportation.
2. Connect the speakers to the Left and Right speaker sockets on the back of the
Retro Turntable. Please note that the speaker cable with the red RCA plug should
be connected to the red RCA socket and the speaker cable with the white RCA
plug should be connected to the white RCA socket.
3. Fully extend the wire radio aerial on the back of the Retro Turntable to receive the
best possible FM radio with sound quality.
4. Plug the mains power into the mains power wall socket and switch on. Your Retro
Turntable will now be in Standby mode.
5. We recommend that you now set the clock.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denver MRD-52 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denver MRD-52 in the language / languages: English as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denver MRD-52

Denver MRD-52 User Manual - German - 21 pages

Denver MRD-52 User Manual - Dutch - 19 pages

Denver MRD-52 User Manual - French - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info