695710
3
Zoom out
Zoom in
Previous page
1/4
Next page
ENG-3 ENG-4
FM radio
1. To select FM, press the MODE button, the display will show FM and the frequency.
2. To activate auto search, press SELECT button or press and hold / buttons until the radio
starts to scan the frequency band, the display will show ‘Scanning …‘(F6), and it will stop
automatically once a station has been found.
3. To search manually, press / buttons in the desired direction to increment the frequency by
0.05MHz. If reception is still poor adjust the position of the antenna or try moving the radio to
another location.
Scan setting
In FM mode, press and hold MENU/INFO button and then press / buttons to select
“Scan setting”. And press the SELECT button to confirm. Press / buttons to select
“All stations/Strong stations only”, and then press the SELECT button to confirm the setting.
USING HEADPHONES (not included)
A stereo headphone jack has been provided so that the radio can be used without disturbing others.
Plug in the headphones at the point marked ‘ ’ and adjust the listening volume to your chosen
level. Excessive sound pressure from earphones and headphones can cause hearing loss. The
speakers will not operate when earphones are fitted.
TECHNICAL SPECIFICATION
Rated voltage (adaptor)
Adaptor output
Rated voltage (radio)
Power consumption
Audio output
Radio
Operating conditions Temperature:
Unit dimension :
Weight :
***SPECIFICATION SUBJECT TO CHANGE WITHOUT FURTHER NOTICE.***
RESET
1. If moving the radio to another location in the country the pre-tuned and stored DAB stations
may no longer be available and it will be necessary to reset the radio back to the factory settings.
2. With the unit switched on, press and hold the MENU/INFO button and press / buttons
until the display shows ‘System’ and press the SELECT button and continue press / buttons
until the display shows “Factory Reset <No> Yes’ and press / buttons to “<Yes>” and press
the SELECT button. (F.7), (F.8)
3. The radio will display “Restarting….” and will then go into standby mode.
Note 1: All stored programmed stations will be lost during reset.
Note 2: Use the battery status without reset function.
DAB Auto Scan
The auto scan will search for the entire DAB Band III channels, After the scan has finished, the first
alphanumerically found stations will be automatically selected.
1. To activate auto scan, press and hold MENU button, and press / buttons to enter into the
Menu to select “Full scan”, finally press the SELECT button to confirm. The display will show
“Scanning…” and a pressing slide bar.(F.3)
2. All the stations that have been found will be stored automatically, press / buttons to
explore the stations that have been found. When you find a station that you would like to listen,
press the SELECT button to confirm.
DAB Manual tune
1. To select manual tune, press and hold MENU/INFO button, and then press / buttons to
select “Manual tune”(F.4). And press the SELECT button to confirm.
2. Press / buttons to move through the DAB channels, the display will show “5A to 13F” and
their associated frequencies. (F.5)
3. When your desired frequency appears in the display, press the SELECT button to listen, the
name of the station group (ensemble/multiplex) will be displayed.
Manual tune
< 5A 174.928MHz >
F.5
DAB
< Manual tune >
F.4
DAB
< Full scan >
F.3
92.75MHz
Scanning . . .
F.6
System
< Factory Reset >
Factory Reset ?
< No > Yes
F.7
F.8
AC 100 – 240V~ 50/60Hz, 0.2A
DC 6V 1A
DC 6V (1.5V x 4 AA)
6 W
2 W RMS
DAB 174-240MHz
FM 87.5-108MHz
5°C to 35°C
Humidity 5% to 90%
190 (L) × 110(W) × 115 (H) mm
0.8kg
DENVER DAB-35MK2 DENVER DAB-35MK2
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denver DAB-35MK2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denver DAB-35MK2 in the language / languages: English as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denver DAB-35MK2

Denver DAB-35MK2 User Manual - German - 4 pages

Denver DAB-35MK2 User Manual - Dutch - 4 pages

Denver DAB-35MK2 User Manual - French - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info