5. Press “AL1 VOL -“ button (5) or “AL2 VOL +” button (6) to adjust volume level. The
display changes to show the volume level indication (00 to 15). 00 is the quietest
and 15 is the loudest.
6. Extend and reposition the antenna (9) for better radio reception.
Pre-set Station Memory
1. The radio can store up to 10 stations.
2. To store a station in memory, tune to the desired radio station. Press and hold down
“SET/PRE M+” button (7) for approximately 2 seconds and a number starting with “P”
on the display will flash.
3. Press “MIN TU +” button (3) or “HOUR TU -” button (2) repeatedly to the desired
memory station. Then press “SET/PRE M+” button (7) once to confirm.
4. To recall the station, press “SET/PRE M+” button (7) until desired station is reached.
Sleep Mode
1. When the radio is on, press “DIMMER HI/LOW SLEEP/SNOOZE” button (4) to enter
sleep mode. Press “DIMMER HI/LOW SLEEP/SNOOZE” button (4) again and
repeatedly to select sleep time in minutes. Radio will turn off after sleep time is
over.
DIMMER
1. With the radio off, press “DIMMER HI/LOW SLEEP/SNOOZE” button (4) for to change
brightness of the display between low, and high.
GENERAL
1. Clock radio is for indoor use only. Avoid direct sunlight and exposure to moisture
and water.
