572869
3
Zoom out
Zoom in
Previous page
1/6
Next page
Opera on Instruc ons
Turn ON/OFF Device
1. Press the power key for 1 second to switch ON and hold for 3 seconds to switch OFF device manually.
2. Connect the device with car cha rger in the car. When car engine starts up, device will be switched ON automa
cally. When
car engine shuts o or car charger been disconnected, device switches OFF with 10 seconds delay (as per se
ng).
How to Enter System Setup
In Video or Photo mode, press the Menu key-UP/DOWN key-REC/OK key to enter the System Setup:
- Date/Time: You may set date/
me.
-
Auto Power o: o/1 minute/3 minutes. To power o DVR automa
cally if DVR is not recording.
- Beep sound: on/o. To turn on/o the sound of pressing bu
ons.
- Language: You may set the desired OSD language menu.
- Backlight (Power save): O/3 min. /5 min. /10 min. To shut o the LCD screen automa
cally during video recording.
- TV Mode: PAL/NTSC
- Power Frequency: 50Hz/60Hz
- Format: Format the memory card.
- Default se
ngs: Cancel/OK
- Version: Firmware version number.
Take Video and Set Video Menu
1. Take video
A
er powered ON, device en
ters Video Mode as default, with icon
displaying at the upper-le corner of screen. Press
the ‘REC/OK’ key to start video recording a
er proper Micro SD card been inserted. During recording, the red icon
ashes.
[Note]
- When the device is mounted on the windshield with car charger connected, it will power ON and start recording
automa
cally once car engine starts up.
- During charging with car charger connected, it supports simultaneous recording.
- During recording, press ‘MODE’ bu
on to lock and protect the current video from recycling (it’s called ‘SOS’ func on).
2. Set Video Menu
Press the Menu key to enter the setup of video op
ons
- Resolu
on: Default
- Loop
recording: O/1 min. /2 min. /3 min. To record, store and recycle the video le by 1/2/3 minutes per sec
on.
- Exposure: -2.0 -5/3 -4/3 -1.0 -2/3 -1/3 +0.0 +1/3 +2/3 +1.0 +4/3 +5/3 +2.0
- Mo
on detec on: On/O. When car is parked and mo on detec on turned On, DVR will detect moving objects in front of car
and trigger recording automa
cally, or stay at standby state if there’s no object moving.
- Record Audio: On/O. Choose to record the video with audio, or record video without any sound.
- Date Stamp: On/O.
- G-Sensor
: O/1G/2G. Once G-sensor turned ON to 1G or 2G and triggered, there’s an icon of ‘lock’ appearing on LCD screen
and current video le will be locked as important le. Such locked les won’t be recycled by loop recording func
on.
Take Photo and Set Photo Menu
1. Take Photos
Press the power key to enter the video mode as default; press the Mode key to enter the Photo mode with icon
displaying on the upper -le corner of the screen. Then, hold the device rmly, then press REC/OK key to take photos. Photos
will be stored into memory card automa
cally.
2. Set Photo Menu
During photo mode, press MENU and REC/OK key to enter photo menu se
ngs.
- Capture Mode: Single/2S Timer /5S Timer /10S Timer
-ENG 03-
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denver CCT-1300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denver CCT-1300 in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denver CCT-1300

Denver CCT-1300 User Manual - German - 6 pages

Denver CCT-1300 User Manual - Dutch - 6 pages

Denver CCT-1300 User Manual - French - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info