There’s a light bar above the handle, the white light on when the Blue/Red LED on constantly, the bar will keep flashing when LED in flashing mode. Press
and hold the EQ/LIGHT button until OFF shows on the display to turn it off together with the disco light.
RADIO OPERATION
Listen to FM radio broadcasts. Press the FUNCTION/ button on the unit to choose FM mode, the display will read the radio frequency.
Eng-2
Note: In order to get the best reception, extend the FM wired ANT. on the rear cabinet to its full length before use. If stereo signal is received, the display will
show the “ST” indicator.
TUNING TO A RADIO STATION
If you know the station frequency that you want to tune to directly:
•Tune to a station by pressing the /TUN.+ or /TUN.- button repeatedly. The station frequency will show on the display.
•Press and hold the /TUN.+ or /TUN.- button to quick scan the stations that with strong signal.
AUTO PRESET MEMORY/SCAN
To scan for stations within reception range and save them to preset memory automatically, press and hold the PLAY/PAUSE/PAIR/SCAN button. After the
unit is finished scanning, the unit will automatically tune to preset number 1 (P01).
MANUAL PRESET MEMORY OPERATION
Choose which stations to save in preset memory instead of scanning automatically.
1.Use the /TUN.+ or /TUN.- button to tune to the station that you want to save as a preset (e.g., 93.1).
2.Press the P-MODE/M./ECHO button. “P01” will flash on the display to indicate that you are saving the station as Preset Memory 01. (To
change the preset memory number, press the 10/M./FOLD.+ or 10/M./FOLD.- buttons.)
3.Press the P-MODE/M./ECHO button to finish saving the station (e.g., P01 is now set to 93.1).
4.To save another station, repeat steps 1 to 3. You may save up to 30 FM stations.
To tune to a preset station:
•To tune to the next preset station, press the 10/M./FOLD.+ button.
•To tune to the previous preset, press the 10/M./FOLD.- button.
USB OPERATION
1.Press the FUNCTION/ button on unit to select USB mode.
2.Plug the USB memory stick to the USB port on top of the unit. Playback will start automatically.
3.To pause playback, press the PLAY/PAUSE/PAIR/SCAN button on unit. The playing time will flash on the display.
4.To resume playback, press the PLAY/PAUSE/PAIR/SCAN button again.
5.To select a desired track, press the /TUN.+ or /TUN.- button respectively during playing until the desired track appears on the display. The unit
will start play automatically.
6.To search for a particular passage during playback, press and hold the /TUN.+ or /TUN.- button to scan the current playing track at high speed
until desired point (passage) appears, then release the button for normal playback mode.
Eng-3
To select a song which track number exceeds 10, press the 10/M./FOLD.+ or 10/M./FOLD.- button each time to skip forward/backward 10 tracks, then
press the /TUN.+ or /TUN.- button to select desired track.
7.To select a desired folder (if the USB contains more than one folder), press and hold the 10/M./FOLD.+ or 10/M./FOLD.- button each time to skip
forward/backward a folder, then press the /TUN.+ or /TUN.- button to select desired track.
Important: The USB port is intended for data transfer only, other devices cannot be used with this USB connection. The use of USB extension
cords is not recommended.Don’t plug the USB from the unit when playing or reading the USB device.
REPEAT PLAY
You can play one track or all tracks on the USB repeatedly.
To repeat a single track
1.Press P-MODE/M./ECHO button on unit during play, the display will show “” and the current track will be played over an over again.
2.To cancel repeat play, press P-MODE/M./ECHO button on unit until “” disappears from the display.
To repeat all the tracks
1.Press P-MODE/M./ECHO button on unit until the “” shows steadily on the display, all tracks on the USB will be played over and over again.
2.To cancel repeat play, press the P-MODE/M./ECHO button on unit until “” disappears from the display.
To repeat the folder (only for USB which contains more than one folder)
1.Press the P-MODE/M./ECHO button on unit until “FOLDER” shows steadily on the display, the current folder will be repeated over and over again.
2.To cancel repeat play, press the P-MODE/M./ECHO button on unit until “FOLDER” disappears from the display.
RANDOM PLAY
Press the P-MODE/M./ECHO button on unit in play mode till the “RAND” shows steadily on the display, the random play will start from next track
automatically. Press the P-MODE/M./ECHO button on unit again until the “RAND” disappears from the display to cancel.
BLUETOOTH OPERATION
1.Press the FUNCTION/ button on unit to switch to BLUETOOTH function, the LCD will display “bt” and the pair indicator will flash at high speed.
2.Turn on the Bluetooth function on the device, scan the unit “BTB-410” and connect, then input the password 0000 if required, the pair indicator keep
light up to indicate connection done, and the display will show “bt”. Press Play to start playback.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Denver BTB-410 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Denver BTB-410 in the language / languages: English as an attachment in your email.
The manual is 1,42 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
