584590
22
Zoom out
Zoom in
Previous page
1/23
Next page

Getting Started Connections Setup Operations
ENGLISH
Check the following before assuming there is a problem with the set:
1. Are all connections proper?
2. Is the set being operated as described in the owners manual?
3. Are the speakers and input components being operated properly?
If the set does not seem to be operating properly, check the points listed below. If these points do not
apply, the set may be damaged. Turn off the power immediately and contact your store of purchase.
Symptom Cause Countermeasure Page
When the power is
turned on, the power
indicator does not
light and no sound
is produced.
The power supply cord’s plug is
not fully plugged in.
Make sure the unit is correctly
plugged in and switched on at
the mains socket.
10
The power indicator
lights but no sound
is produced.
The speaker cables are not fully
connected.
The device you want to listen to
has not been selected.
The volume control is set to
minimum.
The input cable is not fully
connected.
The speaker cable is not
connected properly for the
operation mode.
The input connector is not
connected properly.
The “Turn Oncommand is not
input from the external terminal
when the ZONE TRIGGER ON
MODE is set to ON LINE (the
ZONE operation mode indicator
is not lit).
Trigger voltage is not input to
the TRIGGER IN terminal from
the external device when the
ZONE TRIGGER ON MODE is
set to “TRIG. IN”.
Connect securely.
Insure the correct input is
selected.
Set to an appropriate level.
Connect securely.
Connect the speaker as
required for the Operation Mode
(NORMAL MODE or BRIDGED
MODE).
Connect the input connector
correctly (in the case of BRIDGED
input for each ZONE, input to an
even-numbered channel.)
Send the “Turn On command
from the external device.
Input the trigger voltage from
the external device.
5
7
17
7
5
7
9, 14
9, 14
Rated output: 12-channel driving, NORMAL operation:
30 W x 12 ch (8 Ω/ohms, DIN 1 kHz with 0.7 % T.H.D.)
50 W x 12 ch (4 Ω/ohms, DIN 1 kHz with 0.7 % T.H.D.)
6-channel driving, BRIDGED operation:
100 W x 6 ch (8 Ω/ohms, DIN 1 kHz with 0.7 % T.H.D.)
Total harmonic distortion: 0.05% (Rated output: –3 dB, 8 Ω/ohms, 1 kHz)
Output terminals: Speaker 4 ~ 16 Ω/ohms (NORMAL operation)
Speaker 8 ~ 16 Ω/ohms (BRIDGED operation)
Input sensitivity / Input impedance: 550 mV / 47 kΩ/kohms (NORMAL operation)
275 mV / 47 kΩ/kohms (BRIDGED operation)
Gain: 29 dB (NORMAL operation)
35 dB (BRIDGED operation)
Frequency response: 5 Hz ~ 40 kHz (Low cut filter: OFF)
S/N raito: 95 dB (input terminals short-circuited, with A-weightied network)
Low cut filter: Cut off freguency 80 Hz (–12 dB/oct. Low cut filter: ON)
Trigger in level: 3 ~ 30 V DC
Trigger out level: 12 V DC, 250 mA MAX
Power Supply: AC 120 V, 60 Hz (North America model) / AC 230 V, 50Hz (Europe model)
Power Consumption: 2.5 A (North America model) / 230 W (Europe model)
Standby: 0.5 W or less
(When the “POWER CONFIGURATION” is set to “POWER BUTTON”)
Maximum external dimension: 434 (W) x 171 (H) x 410 (D) mm (17-3/32” x 6-47/64” x 16-9/64”)
Weight: 19.0 kg (Approx 41 lbs 14.2 oz)
b For purposes of improvement, specifications and design are subject to change without notice.
Troubleshooting Specifications
Troubleshooting Specifications
1.POA-3012CI_ENG_101.indd 19 2008/07/30 14:08:31
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon POA-3012CI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon POA-3012CI in the language / languages: English as an attachment in your email.

The manual is 3,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info