614620

Denon MC4000 Manual

6
Zoom out
Zoom in
Previous page
1/32
Next page
6
26. Browse / Library Knob: Turn this knob to navigate through the software. Press the knob to
select an item. Press and hold Shift and then turn this knob to browse quickly through the tracks
in your library.
27. Load: Press this button to load the currently selected track to the deck. Press it quickly twice to
load the same track to both decks (“instant doubles”).
28. Back / Panel: Press this button to move to the previous window of the software. Press and hold
Shift and then press this button to cycle through the panels in the software.
29. Load Prep / Open Prep: Press this button to load the currently selected track to the Prepare
Crate.
Press and hold Shift and then press this button to jump to the Prepare Crate in the software.
30. Sampler Pads: Press these pads to play their corresponding samples in the software’s sampler
(1–4). Press and hold Shift and then press a pad to stop its sample playback.
31. Sample Level: Turn this knob to adjust the volume level of the software’s sampler.
32. Level Meters: These LEDs display the audio signal depending on the state of each deck and
Channel Fader. The meters are not affected by the position of the Master Knob.
If a Channel Fader is at its minimum position, the meter will show the deck’s pre-fader level.
The left meter represents Deck 1, and the right meter represents Deck 2.
If a Channel Fader is higher than its minimum position, both meters will show the summed,
post-fader output of the playing deck(s).
Press the Cue button on a deck to split the meters between a cued deck (Channel Fader at its
minimum position) and a playing deck (Channel Fader higher than its minimum position). The
LEDs for the Cue deck will change only if audio is playing. Otherwise, it will continue showing the
summed, post-fader output of the playing deck.
33. Mic Volume: Turn these knobs to adjust the volume levels of the corresponding microphone
inputs. The Peak light next to each knob indicates the current signal level by its color: green
(low), amber (normal/optimal), or red (maximum/peak).
Important: The audio signals from the microphones are routed directly to the Master Outputs.
They are not routed into/through the software.
34. Mic Echo: Press this button to activate/deactivate the reverb effect on the microphones’ audio
signal.
35. Mic Talk Over / Post: Press this button to activate/deactivate the “talkover” feature, which
automatically reduces the volume level of the master mix when you speak into the microphone.
Press and hold Shift and then press this button to activate/deactivate the “post” feature. When
on, the microphones’ signal will not be sent to the Booth Outputs.
36. Master: Turn this knob to adjust the volume level of the Master Outputs.
37. Booth: Turn this knob to adjust the volume level of the Booth Outputs.
38. Aux: Turn this knob to adjust the input volume of the Aux Inputs.
Front Panel
1
23
55556
4
1. Phones Outputs (1/4” or 1/8” / 6.35 mm or 3.5 mm): Connect headphones to these 1/4” (6.35
mm) and 1/8” (3.5 mm) jacks for monitoring the signal. The headphone volume is controlled
using the Monitor Level knob.
2. Monitor Level: Adjusts the volume for headphone cueing in the software.
3. Monitor Pan: Adjusts the software’s audio output to the headphones, mixing between the cue
output and the master mix output.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon MC4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon MC4000 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 5,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info