668297
13
Zoom out
Zoom in
Previous page
1/32
Next page
13
Rear Panel
1
2
3
44
55
88
9
10 10
12
13
14
11 11
6
7
1. Power Input: Use the included power adapter (5 VDC, 4 A, center-positive) to connect this
input to your power source.
2. Power Button: Press this button to power MC7000 on or off. Power on MC7000 only after
you have connected all of your input devices and before you power on your amplifiers and
loudspeakers. Power off your amplifiers and loudspeakers before powering off MC7000.
3. Cable Restraint: You can secure the power cable to this restraint to help prevent
disconnecting it accidentally.
4. USB Port 1/2: Use a standard USB cable (included) to connect each USB port to an
available USB port on a computer. These 2 ports allow you to control audio from 2
computers at the same time, which allows for seamless transitions while switching from
one DJ to another.
To set a channel to control your computer, set its input selector to USB, and set its USB
selector to the desired port (USB1 or USB2).
5. Master Outputs (XLR, balanced): Use standard XLR cables to connect these outputs to
loudspeakers or an amplifier system. Use the Master knob on the top panel to control the
volume level.
6. Master Outputs (RCA, unbalanced): Use standard RCA cables to connect these outputs
to loudspeakers or an amplifier system. Use the Master knob on the top panel to control
the volume level.
7. Stereo/Mono: Use this switch to set the channel configuration of the master outputs:
Stereo (binaural audio using separate left and right channels) or Mono (summed monaural
audio through both left and right channels).
8. Booth Outputs (XLR, balanced): Use standard XLR cables to connect these outputs to
booth monitors or a booth amplifier system. Use the Booth knob on the top panel to
control the volume level.
9. Line Inputs (RCA, unbalanced): Use standard RCA cables to connect these line-level
inputs to an external audio source.
10. Line/Phono Inputs (RCA, unbalanced): Use standard RCA cables to connect these line-
level or phono-level inputs to an external audio source.
11. Phono/Line Switch: Flip this switch to the appropriate position, depending on the device
connected to the Line/Phono Inputs. If you are using phono-level turntables, set this
switch to Phono to provide the additional amplification needed for phono-level signals. If
using a line-level device, such as a CD player or sampler, set this switch to Line.
12. Mic 1 Input (XLR or 1/4”/6.35 mm): Use a standard XLR or 1/4” (6.35 mm) cable (not
included) to connect a standard dynamic microphone to this input. Use the Mic 1 Level
knob on the top panel to control the volume level.
13. Mic 2 Input (1/4”/6.35 mm): Use a standard 1/4” (6.35 mm) cable (not included) to connect
a standard dynamic microphone to this input. Use the Mic 2 Level knob on the top panel
to control the volume level.
14. Kensington
®
Lock: Use this slot to secure MC7000 to a table or other surface.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon MC 7000 DJ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon MC 7000 DJ in the language / languages: English as an attachment in your email.

The manual is 3,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon MC 7000 DJ

Denon MC 7000 DJ Quick start guide - English, German, French, Italian, Spanish - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info