Manual Denon MC 7000 DJ (page 9 of 32) (English)

668297

Zoom out

Zoom in

1/32

22. Split Cue: When this switch is in the On position, the headphone audio will be “split” such

that all channels sent to cue channel are summed to mono and sent to the left headphone

channel and the master mix is summed to mono and sent to the right channel. When the

switch is in the Off position, the cue channel and master mix will be “blended” together.

23. Deck: Selects which deck in the software is controlled by that hardware deck. The left

deck can control Deck 1 or 3; the right deck can control Deck 2 or 4.

24. Shift: Press and hold this button to access secondary functions of other controls.

25. Sync / Sync Off: When using Serato DJ, press this button to automatically match the

corresponding deck’s tempo with the tempo and phase of the opposite deck.

Press and hold Shift and press this button to deactivate Sync.

26. Cue / Track Start: During playback, press this button to return the track to a temporary

cue point. If you have not set a temporary cue point, then press this button to return to the

start of the track. (To set a temporary cue point, make sure the track is paused, move the

platter to place the audio playhead at the desired location, and then press this button.)

If the deck is paused, press and hold this button to play the track from the temporary cue

point. Release the button to return the track to the temporary cue point and pause it. To

continue playback without returning to the temporary cue point, press and hold this button

and then press and hold the Play button, and then release both buttons.

Press and hold Shift and then press this button to return to the start of the track.

27. Play/Pause / Stutter: This button pauses or resumes playback.

Press and hold Shift and then press this button to “stutter-play” the track from the last set

cue point.

28. Platter: This capacitive, touch-sensitive platter controls the audio playhead when the wheel

is touched and moved. When the Vinyl button is on, move the platter to “scratch” the track

as you would with a vinyl record. When the Vinyl button is off (or if you are touching only the

side of the platter), move the

platter to temporarily adjust the track’s speed.

While editing a loop, move the platter to adjust the Loop In or Loop Out point.

Press and hold Shift and then move the platter to move quickly through the track.

29. Stop Time: Controls the rate at which the track slows to a complete stop (“brake time”).

30. Vinyl: Press this button to activate/deactivate a “vinyl mode” for the platter. When

activated, you can use the platter to “scratch” the track as you would with a vinyl record.

31. Pitch Fader: Move this fader to adjust the speed (pitch) of the track. You can adjust its

total range with the Pitch Bend buttons.

32. Pitch Bend –/+: Press and hold one of these buttons to momentarily reduce or increase

(respectively) the speed of the track.

Press and hold Shift and then press one of these buttons to set the range of the pitch fader.

33. Key Lock / Key Sync: Press this button to activate/deactivate Key Lock. When Key Lock

is activated, the track’s key will remain the same even if you adjust its speed.

While using Serato DJ, press and hold Shift, and then press this button to automatically

match the corresponding deck’s key with the key of the opposite deck. You can use this if

you have installed the Pitch ‘n Time DJ plugin from Serato.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Denon MC 7000 DJ in the language / languages: English as an attachment in your email.

The manual is 3,7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon MC 7000 DJ

Denon MC 7000 DJ Quick start guide - English, German, French, Italian, Spanish - 48 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Denon MC 7000 DJ Manual

Product: