614618
11
Zoom out
Zoom in
Previous page
1/63
Next page
ENGLISH
A
7
REPLACING THE CHANNEL FADER
The Channel fader may be removed without any disassembly of the DN-X500 and DN-X900 itself.
1. Pull out the channel fader knob.
2. Remove the two outer screws attaching the channel fader plate and channel fader bracket assembly from the front panel.
3. Pull the channel fader bracket assembly forward and unplug the 3P cable from the connector on the channel fader printing
board.
4. Install the replacement assembly by reversing above instructions.
A
8
ONLY DN-X900 : FLEX FADER CROSSFADER SLIDE
TORQUE ADJUSTMENT PROCEDURE
1. Follow the procedure at “REPLACING THE CROSSFADER” to remove the crossfader from the set.
2. Move the lever so that the head of the screw is positioned at the hole in the case.
3. Turn the screw using a screwdriver, move the lever and adjust to the desired torque.
4. Reinstall the crossfader following the removal procedure in reverse order.
6
REPLACING THE CROSSFADER
The Crossfader may be removed without disassembly of DN-X500 and DN-X900 itself.
1. Pull out the crossfader knob.
2. Removed the two outer screws attaching the crossfader plate.
3. Remove the two screws attaching the crossfader bracket assembly from chassis.
4. Pull the crossfader bracket assembly forward and unplug the 3P cable from the connector on the panel board.
B
A
A
B
6
ENGLISH
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon DN-X500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon DN-X500 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 6,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info