614629
6
Zoom out
Zoom in
Previous page
1/14
Next page
Connections Fader Start
ENGLISH
Specifications
Top Panel
Part Names and Functions
q
w
e
r
t
y
u
i
o
Q0
Q1 Q2 Q3 Q1 Q4 Q5 Q6
Q9
W0
W1
W2
W3
W4
W5
W6
W7W8W9E1
E0
E2
Q7
Q8
q MAIN MIC ON/OFF button
When the button is lit, Main Mic signal is
transferred to output section, otherwise Main
Mic input is muted.
w AUX MIC ON/OFF button
When the button is lit, Aux Mic signal is
transferred to output section, otherwise Aux
Mic input is muted.
e MAIN MIC LEVEL control
Adjusts the level of the Main Mic input.
r AUX MIC LEVEL control
Adjusts the level of the Aux Mic input.
t MIC EQ controls
Contour the frequency response of the Mic
input –12 dB to +12 dB.
HI
Adjusts high-tone Mic sound –12 dB to +12 dB.
At the center position, sound is flat.
MID
Adjusts mid-tone Mic sound –12 dB to +12 dB.
At the center position, sound is flat.
LOW
Adjusts low-tone Mic sound –12 dB to +12 dB.
At the center position, sound is flat.
y DUCKING ON/OFF button
Use this to switch the Talk Over function ON and
OFF. (ON/OFF is cyclic)
When the button is lit, level of signals except
Mics is attenuated.
The DUCKING attenuation level adjusts. See
below rear panel o (vpage 4).
u SPLIT CUE button
In the STEREO mode, this button feeds STEREO
Program (CUE MASTER) and Cue to both
earcups, in the SPLIT CUE (MONO) mode, the
headphone circuit provides MONO Cue to the
left ear and MONO Program (MASTER) to the
right.
In the STEREO mode, the meter indicates the
stereo level in the LEFT and RIGHT Master
Outputs. In the SPLIT CUE (MONO) mode,
mono Cue level is displayed on the Left meter
and mono Program (CUE MASTER) level is
displayed on the Right meter.
In the SPLIT CUE (MONO) mode, the button is
lit.
i HEADPHONE PAN control
Serves two purposes∙∙∙ In the STEREO mode
it changes the relative levels of the Cue and
Program mixed together in both ear cups. In the
MONO mode it changes the balance between
the Mono Cue in the left ear cup and the Mono
Program in the right.
o HEADPHONE level control
Adjusts the volume for the headphones.
Q0 HEADPHONE output jack
Accepts 1/4” stereo headphone plugs.
Q1 CROSSFADER START A, B switches
Use this to switch the Crossfader Start function
ON and OFF.
Q2 CROSSFADER
Controls the relative output level from the
summed A and B Mixes. When the fader is
at its far left, only the A Mix is heard from the
Outputs. As the fader is moved toward the
right, the amount of B Mix is increased and the
amount of A Mix is decreased. When the fader
is centered, equal amounts of A and B Mixes are
routed to the Outputs. Fully right is all B Mix at
the Outputs.
LINE 2, 4, 6, 8 FADER output terminals
(Rear Panel i (vpage 4))
ø 3.5 mm stereo mini terminal
Others should not be affected a terminal short-
circuit.
Q3 Source input fader (Ch. fader)
Controls the level of the selected Input.
Q4 CROSSFADER ASSIGN switches
A, B:
The channel source is assigned to A or B of the
Crossfader.
THRU:
Select when you dont assign the channel source
into the Crossfader.
Getting Started
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon DN-X1100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon DN-X1100 in the language / languages: English as an attachment in your email.

The manual is 9,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info