614637
24
Zoom out
Zoom in
Previous page
1/34
Next page
17
Basic operation
1
Press POWER.
The unit is powered ON, and DECK CHG. and the track selection
knob light up.
2
Select the input source for each channel using
channel input source switch knob.
For LINE1 and LINE2 input terminals, you can switch between
“PHONO” and “LINE”. For information about setting up these
terminals, see “Connecting external devices and MIC” in page
9.
3
Use LEVEL to adjust the input level.
The input level is displayed in the CUE master level meter.
4
Use HI/MID/LOW to adjust the audio quality.
5
Use the channel fader and cross fader to adjust the
volume.
6
Use MASTER LEVEL to adjust the output level.
n Adjust the cross fader curve
Adjusts the startup response of the cross fader.
Beforehand, use the cross fader assignment switch on the front panel
to set each channel to the cross fader A and B.
Turn X FADER CONTOUR to adjust the curve response of
the cross fader.
: Slow startup curve characteristics (nine steps).
: Sharp startup characteristics, with cut-in/cut-out.
Basic operation
MIC (Mic input)
1
Press MIC ON 1 to use MIC1 and MIC ON 2 to use
MIC2.
When you press the button, it lights up and the MIC input is
switched ON.
2
Use MIC1 LEVEL or MIC2 LEVEL to adjust the MIC
input level.
3
Use MIC1 HI/MID/LOW or MIC2 HI/MID/LOW to
adjust the MIC audio quality.
n Echoing the MIC input
q Press ECHO ON 1 to echo MIC1 and ECHO ON 2 to echo MIC2.
When you press the button, it lights up and the echo is
switched ON.
w Press ECHO ON 1 to echo MIC1 and ECHO ON 2 to echo MIC2.
n Enabling the ducking function
The ducking function detects the MIC input and attenuates the audio
signal level of the master output. This prevents MIC audio from being
inaudible under loud music.
Press DUCKING.
DUCKING lights up.
n Outputting MIC audio to external devices
You can output MIC audio together with the master audio from the
booth/send and REC output terminals.
Press POST.
POST lights up.




   













   













 

POWER
MIC1 HI/MID/LOW
PHONES
ECHO
PHONES
LEVEL
PAN
SPLIT CUE
CUE
MIC2 HI/MID/LOW X FADER CONTOUR
LEVEL
POST
MIC1 LEVEL
MIC2 LEVEL
MIC ON 1/2
DUCKING
ECHO ON 1/2
HI/MID/LOW
DECK CHG.
MASTER LEVEL
DECK CHG.
This section describes operations of the unit without using the DJ software.
For information about how to operate the DJ software, see the instruction manual for the DJ software or the help menu.
For information about the buttons on the unit for operating the DJ software and their functions, see the following pages.
TRACTOR······Page 3, 4
Virtual DJ······Page 5, 6
Channel fader
Cross fader
Track selection
knob
Cross fader
assignment switch
Mixing mode selector switch
USB audio output source selector switch
Channel input
source switch
knob
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon DN-MC6000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon DN-MC6000 in the language / languages: English as an attachment in your email.

The manual is 10,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info