524177
10
Zoom out
Zoom in
Previous page
1/15
Next page
Helpline No. UK/Northern Ireland 0800 328 6020
Rep. Ireland 00800 4467 5888
E-mail Support info@dariolondon.com
Model Number: GT-8000, GT-FSI-05 / GT-FSI-05d
18
Helpline No. UK/Northern Ireland 0800 328 6020
Rep. Ireland 00800 4467 5888
E-mail Support info@dariolondon.com
Model Number: GT-8000, GT-FSI-05 / GT-FSI-05d
19
Directly to the remote socket without
dimmer
If you press the button the remote socket briefly, the plugged-in
consumer will be switched on/off.
With the
button, you can allocate the remote socket to a
new channel at any time, see "Allocating the channels to the remote
sockets".
Directly to the remote socket with dimmer
If you press the button the remote socket briefly, the plugged-in
consumer will be switched on/off.
If you keep the button
the remote socket pressed, the dim-
mer will slowly start to darken the lamps, until the go out, and
subsequently brightens them, until there are fully lit. It repeats this
process, until you release the switch.
If you release the switch and then press it in again, the dimmer will
control the brightness in the other direction.
With the
button, you can allocate the remote socket to a
new channel, see "Allocating the channels to the remote sockets".
Operation
About the remote control (GT-8000)
Switching on and off
To switch a consumer on/off, press the relevant
/ button of the
channel (1, 2, 3 or 4, depending on the allocation).
With the
button, all channels are switched on. With the
button, all channels are switched off.
Dimming lights
In order to use the dimming function, the relevant channel needs to
be activated for the remote socket with dimmer. A channel is always
activated when the relevant
- or button has been pressed on
the remote control.
Now, press the
button, in order to reduce the brightness
increase the brightness.
If you activate all channels with the
- or switch, both
dimmers are controlled simultaneously using the
bzw.
buttons.
If you place both remote sockets with dimmer on the same channel,
both dimmers can only be controlled at the same time.
Note:
After a power failure, a malfunction of the memory for the system
code and the channel of the remote socket could take place in rare
cases. In this case, disconnect the remote socket from the mains for
at least 6 hours and then carry out the allocation procedure again.
Operation
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Delta GT-FSI-05 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Delta GT-FSI-05 in the language / languages: English as an attachment in your email.

The manual is 3,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info