562666
3
Zoom out
Zoom in
Previous page
1/3
Next page
13
Rinsing the steam generator - Disposal
Rinsing the steam generator
After every 10 ironing sessions, proceed as descri-
bed on page 7.
Disposal
In compliance with European directive 2002/96/EC,
the appliance must not be disposed of with household
waste, but taken to an authorised waste separation and
recycling centre.
PROBLEM CAUSE REMEDY
The appliance does not come on. The appliance is not plugged into a
mains socket.
Make sure the appliance is correctly
connected and press the iron and steam
generator buttons.
Steam comes from behind the tank. The maximum pressure safety system
has tripped.
Turntheapplianceoimmediately
andcontactanauthorisedDe'Longhi
Customer Services.
Water leaks out from the holes in the
bottom of the sole plate.
Water has condensed inside the tubes
because steam is being used for the rst
time, or has not been used for some time.
Press the steam button several times away
from the ironing board. This will eliminate
cold water from the steam circuit.
The ironing system is positioned on an
unstable and/or sloping surface.
Rest the ironing system on a stable at
surface.
Browncoloureduidleaksfromthe
sole plate.
Chemical water softeners or additives
have been poured into the water tank or
steam generator.
Never pour products into the water tank
(see “What water to use”). Clean the sole
plate with a damp cloth.
The rst time the appliance is turned on,
you notice smoke
Some parts have been treated with
sealer/lubricant which evaporates the
rst time the iron heats up.
This is normal and will stop when you
have used the iron a few times.
The appliance emits an intermittent
noise associated with vibrations.
Water is being pumped into the steam
generator.
This is completely normal
The appliance emits a continuous noise
associated with vibrations.
Unplug the system from the mains
andcontactanauthorisedDe'Longhi
Customer Services.
After topping up with water, the light
does not reset.
The steam lock is on. Release the steam lock O and press the
OK button.
The lter has been removed for
maintenance/replacement.
Repeat the ll procedure used when the
iron was turned on for the rst time.
After regenerating/replacing the lter,
the light does not reset.
Press and hold the OK button down for
a few seconds.
Troubleshooting
en
en
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi VVX1885 STIRELLA DUALVAP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi VVX1885 STIRELLA DUALVAP in the language / languages: English as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi VVX1885 STIRELLA DUALVAP

DeLonghi VVX1885 STIRELLA DUALVAP User Manual - German - 3 pages

DeLonghi VVX1885 STIRELLA DUALVAP User Manual - Dutch - 4 pages

DeLonghi VVX1885 STIRELLA DUALVAP User Manual - French - 3 pages

DeLonghi VVX1885 STIRELLA DUALVAP Quick start guide - All languages - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info