770068
5
Zoom out
Zoom in
Previous page
1/8
Next page
17
Perfect!
Perfect!
Perfect!
HUMIDITY
TEMPERATURE
HIGH
MEDIUM
LOW
HIGH
MEDIUM
LOW
Operating curve
Perfect!
Perfect!
ORANGE LIGHT: Room conditions far
from optimal level.
GREEN LIGHT: Most people feel good
room conditions, near optimal level.
BLUE LIGHT: Best comfort level.
The well-being feeling is a subjective condition: for this
reason, dierent people may judge dierently the same
environmental conditions.
In particularly severe environmental conditions (large size
of the environment, high temperature or humidity outside,
poor insulation of the room, too many of people or strong
heat load in the room, strong exposure to the sun ...) this
device may not be able to reach the best comfort level.
SILENT FUNCTION
(available in conditioning mode
only)
By activating this function, the operating noise is further re-
duced. To activate it, touch on the remote control the but-
ton (D2). The display shows the relative symbol (C12).
SWING FUNCTION
This function moves the ap evenly distributing the air into the
room.
When the Swing button (D9) is touched, the ap will begin
to move forwards and backwards alternatively.
If touched again, the ap will be locked into its current position.
When the button is next touched, the ap will start to move for-
wards and backwards again.
Please note: in order to avoid damaging the internal mecha-
nisms, the ap must not be moved manually.
REPEAT PAIRING OF CST REMOTE CONTROL
The CST remote control is already paired to the bundled Pinguino
appliance. In case the user wants to perform a pairing with an-
other Pinguino device, or in case of a pairing of brand new CST
remote control, the user needs to put the unit in Stand-by mode
and keep touched for 10 sec sthe MODE selection button (D6) on
the CST remote control. The Led (D10) starts blinking periodi-
cally indicating the pairing phase.
The user is then asked to press for 10 sec the MODE button (C2)
on the Pinguino unit until a double beep is emitted. The pairing
phase is signaled on display by means of a fast ashing of the
dot in the middle of the digits.
When the two devices complete the pairing dialogue, the PAC
emits a double ‘beep’, the display will show the normal visualiza-
tion for Standby. The pairing must be done within 60 sec.
SETTING THE TIMER
The timer allows the delayed start up or shut down of the appli-
ance. This function will prevent wasting electricity by optimising
the operating periods.
How to program delayed shut down
While the appliance is on in any operating mode, delayed
shut down can be programmed.
Touch the
C1C2
C4
C11
C13
C12
C9
C7
C5
C6
C3
C16
C14
C10
C15
C17
C8
timer button (D5): the timer symbol (C7) and
hours (C6) light up.
Touch the (D4) and (D7) buttons until the desired
numbers of hours to shut down appears on the display.
A few seconds after the timer is set, the setting is acquired, the
display shows the operating mode and the timer symbol stays lit.
Once the set time is elapsed, the air conditioner goes into stand-
by.
To cancel the timer program, touch the
C1C2
C4
C11
C13
C12
C9
C7
C5
C6
C3
C16
C14
C10
C15
C17
C8
timer button (D5)
twice. The timer symbol (C7) will go o.
Please note: Once the timer has been activated, by touching the
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi PACEL112 CST at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi PACEL112 CST in the language / languages: English as an attachment in your email.

The manual is 2.7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi PACEL112 CST

DeLonghi PACEL112 CST User Manual - German - 9 pages

DeLonghi PACEL112 CST User Manual - Dutch - 9 pages

DeLonghi PACEL112 CST User Manual - French - 9 pages

DeLonghi PACEL112 CST User Manual - Italian - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info