686472
5
Zoom out
Zoom in
Previous page
1/9
Next page
17
en
Control panel/ Operation
OPERATION
Turning the appliance on
Please note: Before plugging the appliance
check: the caps on the back of the unit are correctly
inserted and screwed on the drainage hose 10.
Plug the appliance into the mains. Press the ON/STAND-BY
button (A) (when turned on, the local air conditioners tarts
operating in the same mode as when it was turned o). The
display shows the room temperature. Press the MODE button
(B) until the indicator light correspondingto the required
mode lights up:
Light (O): air-conditioning mode
Light (N): fan mode
Light (P): dehumidifying mode
Air-conditioning mode
Ideal for hot humid weather when you need to cool and
dehumidify the room. By default, the room temperature is
displayed. Light (S) is on. To set the required temperature,
press the + (E) or - (F) buttons until the required temperature
is displayed (to switch between °Fand °C, press the E and F
buttons together for a few seconds). Light (T) comes on
and light (S) goes o. Fifteen seconds after setting the
temperature, the display swit-ches back to room temperature.
Light (S) comes on again. You can adjust temperature in air
conditioning mode only. Then select the fan speed by pressing
the FAN button (C) untilthe indicator light corresponding to
the required fan speed lightsup:
MAX: the local air conditioner operates at maximum
to reach the required temperature as rapidly as
possible.
MED: reduces noise levels but still maintains a good level
of comfort
Description of the control panel
A ON/STAND-BY button
B MODE selection button
Air conditioning, dehumidifying, fan.
C Fan speed selection button
(MAX/MED/MIN)
D Timer button
E Programmed operation increase temperature/time
button
F Programmed operation decrease temperature/time
button
G Display: Displays the temperature values set, room
temperature and the programmed operating time
H Timer in operation indicator light
I/L/M Fan speed lights
(MAX/MED/MIN on some models)
N Fan mode light
O Air-conditioning mode light
P Dehumidifying mode light
Q Alarm light
R Remote control signal receiver
S Light: displays room temperature
T Light: displays set temperature
Important! Never turn the local air conditioner o by unplugging from the mains. Always press the button, then
wait for a few minutes before unplugging. This allows the appliance to perform a cycle of checks to verify operation.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi PAC CN93ECO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi PAC CN93ECO in the language / languages: English as an attachment in your email.

The manual is 0.62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi PAC CN93ECO

DeLonghi PAC CN93ECO User Manual - German - 9 pages

DeLonghi PAC CN93ECO User Manual - Dutch - 19 pages

DeLonghi PAC CN93ECO User Manual - French - 9 pages

DeLonghi PAC CN93ECO User Manual - Italian - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info