770089
3
Zoom out
Zoom in
Previous page
1/3
Next page
10
- Place kettle on power base.
- Press the ON/OFF switch down (g. 5) to switch the kettle on.
- The pilot light will switch on.
- The kettle will automatically switch o once the water is
boiled (the ON/OFF switch will click upwards and the lights
will switch o ).
- To turn the kettle o before the water boils, you may move the
ON/OFF switch up to the OFF position, or simply lift the kettle
from its base it will switch o and the switch will return to the
OFF position automatically.
Pouring
- Remove the kettle from the power base and carefully pour out
the water. Do not tilt the kettle suddenly or pour water out at
too sharp an angle.
- When you lift the kettle from the base, you may see moisture
on the top surface of the base. Condensation on the base is
perfectly normal, and should not be a cause for alarm.
Please note: Empty the kettle after each use. Rinse the
kettle with fresh water if you have not used for more than two days.
To reduce energy consumption and waste of water, use only the
amount of water you need.
SAFETY DEVICES
1) Automatic ON/OFF switch:
Your kettle is tted with an ON/OFF switch which automatically
switches o once the water has boiled. If the kettle has just
boiled, wait a minute or so before re-boiling the kettle. Do not
attempt to hold the ON/OFF switch in the on position or adjust
the switch mechanism.
2) Safety cut-out:
If the kettle is switched ON with too little or no water, it is
protected against damage by a safety cut-out which will
switch o the power. If this cut-out operates, disconnect the
kettle from the mains supply and leave to cool down before
relling with cold water (otherwise the element could be
damaged).
3) If kettle is lifted from base while operating (ON), it will
automatically switch o.
MAINTENANCE
Cleaning the kettle
- Allow the kettle to cool down fully and disconnect the
appliance from the mains before cleaning.
- Do not immerse the kettle or base in water.
- To maintain the precious nish of the appliance, we
recommend cleaning the outside of the appliance with a
damp cloth and water only.
- DO NOT use metal polish, ammable liquids or harsh scouring
agents.
- Ensure that all connectors and sockets are kept dry.
Scale
When the water is heated, the minerals in the water solidify, making
the water appear cloudy. As soon as you notice a lm forming on
the water, or, when cleaning the lter, if you notice a lm on the
walls or the element, descale the kettle and its lter.
Scale lter
Your kettle is tted with a scale lter to prevent loose particles of
scale being poured into your beverage. This lter is both removable
and washable. You should remove and clean the water lter when
you notice any deposits being left on the lter or if the pouring
eciency is impaired.
Removing the scale lter
- Allow the kettle to cool down fully and disconnect the
appliance from the mains electrical supply. Make sure that
your hands are clean and free from soap, cream or anything
which might taint the water.
- Empty the kettle and remove the lter as shown in g. 1.
Rinse under a tap whilst brushing with a soft brush (g. 2) and
replace the lter (g. 3). Filter may pose suocation risk,
do not let it unattended after cleaning.
To clean the kettle and the scale lter
It is vital to clean and descale regularly in order to maintain good
working order. Excessive scale build-up may aect the performance
of the product and shall be avoided.
- Use descaler for kettles (tip: use citric-acid based descaling
solutions). When limescale starts forming on the heating
element, buy a suitable descaler for kettles and descale
according to the instructions given on the descaler pack.
- After descaling, boil repeatedly with fresh water and rinse
thoroughly to completely eliminate all residues of descaler
which could damage the appliance. Repeat the boil and rinse
steps for at least three times.
- If the lter requires descaling, remove and immerse in the
same descaling solution.
- Make sure electric parts are completely dry before using the
kettle.
TECHNICAL CHARACTERISTICS
Supply voltage See rating plate
Absorbed power
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi KBD2001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi KBD2001 in the language / languages: English as an attachment in your email.

The manual is 0.12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi KBD2001

DeLonghi KBD2001 User Manual - German - 4 pages

DeLonghi KBD2001 User Manual - Dutch - 4 pages

DeLonghi KBD2001 User Manual - French - 4 pages

DeLonghi KBD2001 Additional guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info